Is the Quick connector plug for injection molds with GZ and valve, DYROS series 80 compatible with both metric and BSP threads and rated for 15 bar working pressure?

Yes. The Quick connector plug for injection molds with GZ and valve, DYROS series 80 is available with either metric or BSP external threads and is rated for a working pressure of 15 bar. Itâs designed for cooling liquids in plastic processing, compressed air, gas cylinder applications and similar technical uses; material is brass with Viton valve sealing.

Does the Quick connector plug for injection molds with GZ and valve, DYROS series 80 require special tools for installation and removal?

Quick connector plug for injection molds with GZ and valve, DYROS series 80 does not require any special tools for routine installation or removal. The plug is designed for straightforward hand-tightening to its metric or BSP external thread; light use of a standard wrench may be used to ensure a leakâtight connection if needed. For safety and to avoid damage to the brass body and Viton valve sealing, avoid excessive force or inappropriate tools. Always depressurize the system (max working pressure 15 bar) and drain fluids before removal.

Can the Quick connector plug for injection molds with GZ and valve, DYROS series 80 be used with aggressive cooling fluids at 15 bar?

Yes. the Quick connector plug for injection molds with GZ and valve, DYROS series 80 can be used with aggressive cooling fluids at 15 bar, with important caveats. Why: the coupling is designed for cooling liquids in plastic processing and has a working pressure of 15 bar. Its body material is brass and the valve sealing uses Viton (FKM), both of which offer good chemical resistance to many aggressive fluids compared with standard elastomers and steels. Caveats: - Compatibility depends on the specific aggressive fluid. Brass can be attacked by certain media (e.g., ammonia, some acids, strong alkalis, and halogenated solvents). Viton resists many hydrocarbons, oils, and some chemicals but is not compatible with all aggressive agents (e.g., concentrated ketones, certain amines, or strong acids/alkalis). - Temperature and concentration of the fluid affect compatibility and seal life. - For aggressive or hazardous fluids, verify material compatibility with manufacturer chemical-resistance data or perform testing. Consider stainless steel bodies and alternative seal materials if needed. - Ensure any regulatory, safety, and maintenance requirements for use with aggressive media are met. Recommendation: before deployment, confirm the specific fluid, concentration, and temperature against brass and Viton compatibility charts or consult the DYROS series 80 supplier/manufacturer for written approval.

Quick connector plug for injection molds with GZ and valve, DYROS series 80

Additional information

Material	B – brass (bronze)

DYROS series 80 quick coupling plug with external thread and valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-N812-V	DN 13 plug with GZ 1/2", with valve	-	15	In stock	Enquiry
DY-N824-V	Plug DN 13 with GZ M24x1.5, with valve	-	15	In stock	Enquiry
DY-N834-V	DN 13 plug with GZ 3/4", with valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 80 quick coupling plug with external thread and valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.