Is the NiTO 1/2" water quick connector plug with hose end, brass compatible with standard garden hoses and fittings?

Yes. The NiTO 1/2" water quick connector plug with hose end, brass is compatible with standard garden hoses and fittings that accept 1/2" hose connections. Made of chrome-plated brass, itâs designed for typical water-use pressures (up to 25 bar) and temperatures (up to +80Â°C), so it will work reliably with common garden hoses, taps, and quick-connect systems sized for 1/2". Ensure your existing hose or fitting uses a 1/2" connection or that you have an appropriate adapter for any differing thread or coupling standard.

Does the NiTO 1/2" water quick connector plug with hose end, brass withstand hot water applications up to +80Â°C?

Yes. The NiTO 1/2" water quick connector plug with hose end, brass is specified for an operating temperature up to +80Â°C, so it is suitable for hot water applications up to that temperature. The connector is made of chrome-plated brass and rated for working pressure up to 25 bar; ensure system conditions (pressure, temperature fluctuations, and any media compatibility) remain within these limits for safe use.

How do I clean and maintain the NiTO 1/2" water quick connector plug with hose end, brass to prevent leaks?

To prevent leaks and keep the NiTO 1/2" water quick connector plug with hose end, brass functioning reliably, follow these cleaning and maintenance steps: 1. Safety first - Turn off water supply and relieve system pressure before disconnecting the connector. - Allow the connector to cool if it was exposed to hot water (operating temperature up to +80Â°C). 2. Regular external cleaning - Wipe the chrome-plated brass body with a soft cloth dampened with mild soapy water to remove dirt and deposits. - Rinse with clean water and dry with a soft cloth to avoid water spots and corrosion on the chrome finish. - Avoid abrasive pads, steel wool, or harsh chemical cleaners that can scratch or damage chrome plating. 3. Cleaning the internal parts and seals - Inspect the internal bore, valve seat and O-rings for debris, mineral build-up or damage. - Rinse the internal passage with clean water; for limescale, soak removable parts briefly in a 1:1 solution of white vinegar and water, then rinse thoroughly. - Use a soft brush or cloth to gently remove deposits; do not use sharp tools that could nick valve seats or O-rings. 4. Seal care and replacement - Regularly check O-rings and seals for cuts, flattening or hardening; damaged seals are the usual cause of leaks. - Lightly lubricate O-rings with a manufacturer-safe silicone grease (food-grade silicone for potable water systems) to preserve flexibility and improve sealing. - Replace worn or damaged O-rings/seals promptly with compatible sizes/materials. 5. Reassembly and leak test - Reassemble ensuring seals sit correctly and moving parts operate smoothly. - Gradually restore water pressure and check for leaks at the hose end and plug connection up to normal working pressure (up to 25 bar). If any leak persists, depressurize and recheck seals or replace components. 6. Preventive practices - Avoid exceeding operating temperature (+80Â°C) and working pressure limits (25 bar). - Store the connector dry and protected from freezing temperatures to prevent damage to seals and chrome plating. - Perform visual inspection and basic cleaning every few months or more often in hard-water or high-use environments. Following these steps will minimize leaks and extend the service life of your NiTO 1/2" water quick connector plug with hose end, brass.

Plug water quick coupling NiTO 1/2″ with fitting for hose, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

A high-quality NiTO water quick coupling plug 1/2″ with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NT-53600A3	Quick coupling plug 1/2" with fitting for hose 1/2", brass chrome-plated	12	25	In stock	Enquiry
NT-5360BA3	Quick coupling plug 1/2" with fitting for hose 3/8", brass chrome-plated	10	25	In stock	Enquiry
NT-5360CA3	Quick coupling plug 1/2" with fitting for hose 5/8", brass chrome-plated	16	25	In stock	Enquiry
NT-5360DA3	Quick coupling plug 1/2" with fitting for hose 1/4", brass chrome-plated	6	25	In stock	Enquiry
NT-5360EA3	Quick coupling plug 1/2" with fitting for hose 3/4", brass chrome-plated	20	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A high-quality NiTO water quick coupling plug 1/2″ with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.