Silicone 45° polyester-reinforced elbow, E45, blue
Silicone elbow 45° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arm lengths of 152, 250 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1.5 bar to 8.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Silicone elbow 45° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arm lengths of 152, 250 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1.5 bar to 8.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
Additional information
| Material | VMQ – silicone |
|---|---|
| Maximum operating temperature [°C] | 180 |
| Minimum operating temperature [°C] | -50 |
| Vacuum resistance | no |
| Standard length [m] | 50 |
