Polyester-reinforced silicone reduction connector, SR, blue
Silicone reducer connector reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm3. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 1 bar to 7.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| VP-SR-016-013 | Silicone reducing connector 16x13 mm | 16 | 7.33 | |
| VP-SR-019-013 | Silicone reducing connector 19x13 mm | 20 | 6.6 | |
| VP-SR-019-016 | Silicone reducing connector 19x16 mm | 20 | 6.6 | |
| VP-SR-022-016 | Silicone reducing connector 22x16 mm | 22 | 6.07 | |
| VP-SR-025-016 | Silicone reducing connector 25x16 mm | 25 | 5.8 | |
| VP-SR-025-019 | Silicone reducing connector 25x19 mm | 25 | 5.8 | |
| VP-SR-032-025 | Silicone reducing connector 32x25 mm | 32 | 5.3 | |
| VP-SR-035-025 | Silicone reducing connector 35x25 mm | 35 | 5.13 | |
| VP-SR-038-025 | Silicone reducer connector 38x25 mm | 38 | 5 | |
| VP-SR-038-032 | Silicone reducer connector 38x32 mm | 38 | 5 | |
| VP-SR-038-035 | Silicone reducer connector 38x35 mm | 38 | 5 | |
| VP-SR-051-038 | Silicone reducing connector 51x38 mm | 50 | 3.67 | |
| VP-SR-054-051 | Silicone reducing connector 54x51 mm | 55 | 3.07 | |
| VP-SR-057-051 | Silicone reducing connector 57x51 mm | 55 | 3 | |
| VP-SR-060-051 | Silicone reducer connector 60x51 mm | 60 | 2.33 | |
| VP-SR-063-051 | Silicone reducer connector 63x51 mm | 65 | 2.33 | |
| VP-SR-063-057 | Silicone reducing connector 63x57 mm | 65 | 2.33 | |
| VP-SR-070-051 | Silicone reducing connector 70x51 mm | 70 | 2.17 | |
| VP-SR-070-060 | Silicone reducer connector 70x60 mm | 70 | 2.17 | |
| VP-SR-070-063 | Silicone reducing connector 70x63 mm | 70 | 2.17 | |
| VP-SR-076-051 | Silicone reducer connector 76x51 mm | 75 | 2 | |
| VP-SR-076-060 | Silicone reducer connector 76x60 mm | 75 | 2 | |
| VP-SR-076-063 | Silicone reducer connector 76x63 mm | 75 | 2 | |
| VP-SR-076-070 | Silicone reducer connector 76x70 mm | 75 | 2 | |
| VP-SR-080-070 | Silicone reducing connector 80x70 mm | 80 | 1.73 | |
| VP-SR-083-076 | Silicone reducing connector 83x76 mm | 80 | 1.73 | |
| VP-SR-089-070 | Silicone reducing connector 89x70 mm | 90 | 1.5 | |
| VP-SR-089-076 | Silicone reducing connector 89x76 mm | 90 | 1.5 | |
| VP-SR-102-076 | Silicone reducing connector 102x76 mm | 100 | 1.33 | |
| VP-SR-102-089 | Silicone reducing connector 102x89 mm | 100 | 1.33 | |
| VP-SR-127-102 | Silicone reducing connector 127x102 mm | 125 | 1 |
Silicone reducer connector reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm3. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 1 bar to 7.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
Additional information
| Material | VMQ – silicone |
|---|---|
| Maximum operating temperature [°C] | 180 |
| Minimum operating temperature [°C] | -50 |
| Vacuum resistance | no |
Additional information
| Material | VMQ – silicone |
|---|---|
| Maximum operating temperature [°C] | 180 |
| Minimum operating temperature [°C] | -50 |
| Vacuum resistance | no |
