Does the Rotating union for pneumatic tools, aluminium support 360Â° rotation and withstand a maximum working pressure of 10 bar?

Yes. The Rotating union for pneumatic tools, aluminium supports 360Â° rotation and withstands a maximum working pressure of 10 bar. According to the product description, it rotates fully to prevent hose twisting and maintain airflow, is made of aluminum, and is rated for a maximum working pressure of 10 bar.

Is the Rotating union for pneumatic tools, aluminium compatible with quick-connect fittings and standard air hoses?

Rotating union for pneumatic tools, aluminium is generally compatible with standard air hoses and quick-connect fittings used on most pneumatic tools. The description specifies itâs for use with most pneumatic tools, supports 360Â° rotation to prevent hose twisting, and is rated to 10 bar working pressure-parameters that align with common quick-connect systems and typical compressed-air hoses. However, compatibility can depend on the specific thread/type of quick-connect coupling and hose fittings you use, so verify matching connection sizes/types (e.g., NPT, BSP, or specific quick-connect male/female standards) before purchase.

Can the Rotating union for pneumatic tools, aluminium be used outdoors and resist corrosion in wet conditions?

Rotating union for pneumatic tools, aluminium can be used outdoors, but its corrosion resistance in wet conditions is limited. The body is made of aluminum, which is lightweight and offers some natural oxidation resistance; however, aluminum can corrode over time when exposed to prolonged moisture, salt, or aggressive environments unless it has a protective coating or anodizing. The product description does not mention any specific corrosion-resistant finish, seals rated for outdoor/wet use, or IP protection. Practical guidance: - For occasional outdoor use in dry or mildly wet conditions, it should perform adequately. - For continuous exposure to rain, splashing, high humidity, or saline environments (coastal areas), expect accelerated corrosion and possible seal degradation, reducing service life and reliability. - To improve outdoor performance, consider applying corrosion protection (e.g., suitable coatings), using a model with stainless-steel components or specified corrosion-resistant treatment, and performing regular inspection and maintenance (cleaning, lubrication, replacing worn seals). In short: usable outdoors for limited exposure, but not ideal for long-term wet or corrosive conditions unless additional protective measures are taken.

Swivel coupling for tools pneumatic, aluminum

All products, Pneumatic accessories/

Additional information

Material	AL – aluminum

Swivel coupling for use with greater tools pneumatic. possibility turn o 360° effectively prevents twisting connected line (stays correct Flow rate air) and allows on free operation with connection a tool pneumatic. maximum Working pressure: 10 bar. Material: aluminum. weight: 78 g.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-735153	Coupling swivel with 1/4" female / 1/4" male, aluminum	-	10	In stock	0 zł		Enquiry
EW-735154	Coupling swivel with 3/8" female / 3/8" male, aluminum	-	10	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Swivel coupling for use with greater tools pneumatic. possibility turn o 360° effectively prevents twisting connected line (stays correct Flow rate air) and allows on free operation with connection a tool pneumatic. maximum Working pressure: 10 bar. Material: aluminum. weight: 78 g.