Is the TE-BT screw connection tee, stainless steel, compatible with BSPT threads sealed using Teflon tape or anaerobic sealant while maintaining the 2.5:1 safety factor?

Yes. The TE-BT screw connection tee, stainless steel (24Â° DIN 2353 socket with external metric thread and external BSPT thread) is specified for thread sealing with Teflon tape or anaerobic sealant, and the product description explicitly states sealing on the BSPT thread using those methods. The safety factor of 2.5:1 is part of the fittingâs specification and applies to the available series (L light and S heavy) made of AISI 316 stainless steel. Important practical notes to maintain the 2.5:1 safety factor: - Use the correct sealing method (Teflon tape applied properly or compatible anaerobic sealant) without over-tightening or building excessive thread bulk that would prevent the 24Â° seat from seating correctly. - Assemble per DIN 2353 torque recommendations and any manufacturer assembly instructions for the TE-BT to avoid deformation of threads or seats. - Prefer the S (heavy) series for higher mechanical loads or critical applications. - Ensure cleanliness and inspect threads/seats for damage before assembly. When installed and sealed as specified, the TE-BT screw connection tee, stainless steel is compatible with BSPT threads sealed with Teflon tape or anaerobic sealant while maintaining the 2.5:1 safety factor.

Can the TE-BT screw connection tee, stainless steel, be used with BSPT threads sealed by gasketed fittings while keeping the 2.5:1 safety factor?

Yes - TE-BT screw connection tee, stainless steel can be used with BSPT threads sealed by gasketed fittings only if the BSPT mating fittings rely on thread sealing (Teflon tape or anaerobic sealant) as described, and the assembly matches the specification: 24Â° DIN 2353 socket with external metric thread and external BSPT thread, material AISI 316, and the chosen series (L or S) rated accordingly. Maintaining the specified 2.5:1 safety factor requires using the correct series (L for light or S for heavy) for the application pressure and load, proper installation torque, compatible mating fittings, and approved sealing method (Teflon tape or anaerobic sealant). If gasketed fittings provide a different sealing method or change the load path, verify with manufacturer data to ensure the 2.5:1 safety factor is preserved.

Can the TE-BT screw connection tee, stainless steel, be used with BSPT threads in corrosive media while retaining the 2.5:1 safety factor?

Yes. TE-BT screw connection tee, stainless steel (AISI 316) can be used with BSPT threads in corrosive media while retaining the 2.5:1 safety factor, provided the following conditions are met: - The connection used is the specified TE-BT configuration: 24Â° DIN 2353 socket with external metric thread and external BSPT thread, with thread sealing by PTFE tape or anaerobic sealant as intended. The product description explicitly states BSPT external thread sealing on thread and a declared safety factor of 2.5:1. - The chosen series (L light or S heavy) and wall/thickness are appropriate for the operating pressure and mechanical loads in your application. Use the heavy series (S) where higher loads, pressure or mechanical stress are expected. - The corrosive medium is compatible with AISI 316 stainless steel for the expected temperature, concentration and exposure time. AISI 316 offers good general corrosion resistance and is suitable for many corrosive environments, but it can be attacked by chlorides, strong acids, or certain aggressive chemicals; verify chemical compatibility (or consider higher-grade alloys if needed). - Thread sealing methods (PTFE tape or anaerobic sealant) are chemically compatible with the medium and temperature range to ensure reliable sealing and to avoid degradation that could compromise mechanical engagement or leak-tightness. - Installation follows manufacturerâs torque and assembly instructions to avoid thread damage or overstressing; correct assembly preserves the designed safety factor. - Regular inspection and maintenance are performed in aggressive environments to detect corrosion, wear or seal degradation early. If any of these conditions cannot be guaranteedâe.g., the medium is highly chloride-rich at elevated temperature, or sealing materials are incompatibleâconsult material compatibility data or the manufacturer; a higher-alloy material or alternate sealing/connection method may be required to maintain the 2.5:1 safety factor.

TE-BT screw connection tee, stainless steel

Additional information

Material	SS – stainless steel

DIN 2353 screw-in tee fitting, type TE-BT: 24° DIN 2353 socket with external metric thread and external BSPT thread (sealing on the thread – with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: L (light series), S (heavy series). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-TE-06L-BT-02-SS	DIN 2353 fitting TE 6L 1/8" BSPT, AISI 316	-	315	In stock	Enquiry
HD-TE-06S-BT-04-SS	DIN 2353 fitting TE 6S 1/4" BSPT, AISI 316	-	630	In stock	Enquiry
HD-TE-08L-BT-04-SS	DIN 2353 fitting TE 8L 1/4" BSPT, AISI 316	-	315	In stock	Enquiry
HD-TE-08S-BT-04-SS	DIN 2353 fitting TE 8S 1/4" BSPT, AISI 316	-	630	In stock	Enquiry
HD-TE-10L-BT-04-SS	DIN 2353 fitting TE 10L 1/4" BSPT, AISI 316	-	315	In stock	Enquiry
HD-TE-10S-BT-06-SS	DIN 2353 fitting TE 10S 3/8" BSPT, AISI 316	-	630	In stock	Enquiry
HD-TE-12L-BT-06-SS	DIN 2353 fitting TE 12L 3/8" BSPT, AISI 316	-	315	In stock	Enquiry
HD-TE-12S-BT-06-SS	DIN 2353 fitting TE 12S 3/8" BSPT, AISI 316	-	630	In stock	Enquiry
HD-TE-14S-BT-08-SS	DIN 2353 fitting TE 14S 1/2" BSPT, AISI 316	-	630	In stock	Enquiry
HD-TE-15L-BT-08-SS	DIN 2353 fitting TE 15L 1/2" BSPT, AISI 316	-	315	In stock	Enquiry
HD-TE-16S-BT-08-SS	DIN 2353 fitting TE 16S 1/2" BSPT, AISI 316	-	400	In stock	Enquiry
HD-TE-18L-BT-08-SS	DIN 2353 fitting TE 18L 1/2" BSPT, AISI 316	-	315	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DIN 2353 screw-in tee fitting, type TE-BT: 24° DIN 2353 socket with external metric thread and external BSPT thread (sealing on the thread – with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: L (light series), S (heavy series). Material: AISI 316 steel.