Is the Twisted coupling for pneumatic hoses with external thread, type C1/C suitable for soft plastic hoses and how do I properly attach it?

Yes. The Twisted coupling for pneumatic hoses with external thread, type C1/C is suitable for soft plastic hoses. Itâs specifically designed for hoses made of soft plastics and provides a secure, pressure-rated connection (working pressure up to 18 bar). Proper attachment: 1. Ensure hose end is cut square and free of burrs or debris. 2. Push the hose fully onto the barbed fitting until it seats firmly. 3. Slide the nut over the hose and screw it onto the fitting, tightening until snug to compress the hose onto the barb. 4. Check for leaks at low pressure first, then test up to working pressure (max 18 bar). 5. Use nickel-plated brass fittings as supplied; if external strain or vibration is expected, consider additional hose clamps or supports for extra security.

Can the Twisted coupling for pneumatic hoses with external thread, type C1/C handle 18 bar working pressure and how do I secure the hose?

Twisted coupling for pneumatic hoses with external thread, type C1/C can be used with hoses made of soft plastics and is rated for 18 bar working pressure. The hose is secured by pushing it onto the fitting and tightening the nut (screw-on connection) which clamps the hose onto the fitting. Material is nickel-plated brass. Ensure the hose OD matches the coupling size and fully seat the hose before tightening; for higher security consider adding a hose clamp or crimp sleeve compatible with the hose material and pressure rating.

How do I correctly install the Twisted coupling for pneumatic hoses with external thread, type C1/C onto soft-plastic hoses?

To correctly install the Twisted coupling for pneumatic hoses with external thread, type C1/C onto soft-plastic hoses, postÄpuj wedÅug poniÅ¼szych krokÃ³w: 1. Przygotuj wÄÅ¼e: upewnij siÄ, Å¼e koÅcÃ³wka wÄÅ¼a jest czysta, rÃ³wna i pozbawiona zadziorÃ³w. Odetnij prosto przy pomocy ostrego noÅ¼a lub obcinaka do wÄÅ¼y. 2. SprawdÅº dopasowanie: zweryfikuj, czy wewnÄtrzna Årednica wÄÅ¼a odpowiada Årednicy trzpienia zÅÄcza Twisted coupling for pneumatic hoses with external thread, type C1/C. WÄÅ¼ powinien wsunÄÄ siÄ na trzpieÅ bez nadmiernego rozciÄgania. 3. NaÅÃ³Å¼ nakrÄtkÄ (jeÅli jest demontowalna): wsuÅ nakrÄtkÄ zÅÄczki na wÄÅ¼ tak, aby gwint nakrÄtki byÅ skierowany ku koÅcÃ³wce wÄÅ¼a. 4. WsuÅ wÄÅ¼ na trzpieÅ: silnie i rÃ³wnomiernie pchnij wÄÅ¼ na metalowy trzpieÅ zÅÄczki aÅ¼ do oporu. waÅ¼ne, aby wÄÅ¼ objÄÅ caÅy gÅadki lub Å¼ebrowany odcinek trzpienia przeznaczony do osadzenia. 5. DokrÄÄ nakrÄtkÄ: nasuÅ nakrÄtkÄ na gwint zewnÄtrzny zÅÄczki i skrÄcaj rÄcznie, nastÄpnie dokrÄÄ przy uÅ¼yciu odpowiedniego klucza (lewÄ rÄkÄ stabilizuj korpus zÅÄczki, prawÄ dokrÄÄ nakrÄtkÄ). DokrÄcaj do momentu, gdy nakrÄtka pewnie zaciskajÄc wÄÅ¼ zapewni szczelne poÅÄczenie. unikaj nadmiernego momentu, ktÃ³ry mÃ³gÅby uszkodziÄ wÄÅ¼. 6. SprawdÅº szczelnoÅÄ i wytrzymaÅoÅÄ: podÅÄcz instalacjÄ i stopniowo zwiÄkszaj ciÅnienie do roboczego (maks. 18 bar). Obserwuj miejsce poÅÄczenia pod kÄtem przeciekÃ³w powietrza i przemieszczeÅ wÄÅ¼a. Przy braku przeciekÃ³w i przemieszczeÅ montaÅ¼ jest prawidÅowy. 7. Dodatkowe uwagi: stosuj Twisted coupling for pneumatic hoses with external thread, type C1/C wyÅÄcznie z wÄÅ¼ami miÄkko-plastikowymi o prawidÅowej Årednicy. NakrÄtka i korpus sÄ wykonane z niklowanej mosiÄdzu. nie stosuj nadmiernej siÅy przy dokrÄcaniu i unikaj agresywnych chemikaliÃ³w mogÄcych uszkodziÄ materiaÅ wÄÅ¼a.

Screw-together fitting for pneumatic hoses with male thread, type C1/C

All products, Tubular fittings/

Additional information

Material	B – brass (bronze)

Push-on coupling with male thread, type C1/C, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2356001	Straight fitting C1/C, hose 5/3, M5 male	-	16	In stock	Enquiry
MW-2356002	Straight fitting C1/C, hose 6/4, M6 male	-	16	In stock	Enquiry
MW-2356003	Straight fitting C1/C, hose 6/4, M12x1.5 male	-	16	In stock	Enquiry
MW-2356004	Straight fitting C1/C, hose 6/4, 3/8" BSP male	-	16	In stock	Enquiry
MW-2356005	Straight fitting C1/C, hose 8/6, M12x1.5 male	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Push-on coupling with male thread, type C1/C, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.