What mounting screw sizes are required for the Bottom plate short for DIN 3015 standard clamp across size groups 0â6?

Bottom plate short for DIN 3015 standard clamp . required mounting screw sizes: - Size group 0: one mounting hole . use a single screw M8. - Size groups 1â6: two mounting holes . use two screws M8 (one per hole). Material options: carbon steel or AISI 316L stainless steel.

Can the Bottom plate short for DIN 3015 standard clamp be used with both carbon steel and AISI 316L clamp bodies?

Bottom plate short for DIN 3015 standard clamp Format can be used with clamp bodies made of either carbon steel or AISI 316L, provided the material of the plate matches the intended corrosion and application requirements. The part is offered in both carbon steel and AISI 316L versions; choose the same or compatible material grade for welding and service conditions (size group 0 has one screw hole; groups 1â6 have two). For corrosive environments or stainless clamp bodies, select the AISI 316L plate to ensure material compatibility and corrosion resistance.

Is the Bottom plate short for DIN 3015 standard clamp compatible with threaded holes or nut inserts?

Bottom plate short for DIN 3015 standard clamp Format is intended for welding to assemble DIN 3015 clamp type 100/101. For size group 0 it provides one hole for a screw; for size groups 1â6 it provides two holes for screws. The description does not mention built-in threaded holes or nut inserts, only through-holes for screws, and the material options are carbon steel or AISI 316L. Therefore, you should assume it is not supplied with internal threads or captive nutsâcompatibility with threaded holes or nut inserts depends on how you prepare or modify the welded attachment point (e.g., welding on a nut insert, adding a welded boss with threads, or using a separate nut on the back side). If you require native threaded attachment, specify or request versions with tapped holes or welded nut inserts from the manufacturer.

Bottom plate short for DIN 3015 standard clamp

All products, Clamps for hydraulic pipes/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10, 2

Short bottom plate for welding for the assembly of DIN 3015 standard clamp type 100/101. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-APIN-0	Short bottom plate standard thickness 0	-	-	In stock	Enquiry
TC-APIN-0-SS	Short bottom plate, standard, thickness 0, AISI 316L	-	-	In stock	Enquiry
TC-APIN-1	Short bottom plate standard thickness 1	-	-	In stock	Enquiry
TC-APIN-1-SS	Short bottom plate, standard, thickness 1, AISI 316L	-	-	In stock	Enquiry
TC-APIN-2	Short bottom plate standard thickness 2	-	-	In stock	Enquiry
TC-APIN-2-SS	Short bottom plate, standard, thickness 2, AISI 316L	-	-	In stock	Enquiry
TC-APIN-3	Short bottom plate, standard, thickness 3	-	-	In stock	Enquiry
TC-APIN-3-SS	Short bottom plate, standard, thickness 3, AISI 316L	-	-	In stock	Enquiry
TC-APIN-4	Short bottom plate, standard, thickness 4	-	-	In stock	Enquiry
TC-APIN-4-SS	Short bottom plate, standard, thickness 4, AISI 316L	-	-	In stock	Enquiry
TC-APIN-5	Short bottom plate, standard, thickness 5	-	-	In stock	Enquiry
TC-APIN-5-SS	Short bottom plate, standard, thickness 5, AISI 316L	-	-	In stock	Enquiry
TC-APIN-6	Short bottom plate, standard, thickness 6	-	-	In stock	Enquiry
TC-APIN-6-SS	Short bottom plate, standard, thickness 6, AISI 316L	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Short bottom plate for welding for the assembly of DIN 3015 standard clamp type 100/101. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.