Can the Side nozzle for coolant, 1/4" system, LOC-LINEÂ® withstand continuous use at 3 bar and +76Â°C without deformation or loss of flow?

Yes. The Side nozzle for coolant, 1/4" system, LOC-LINEÂ® is specified for a working pressure up to 3 bar and an operating temperature up to +76Â°C. Because its material is acetal (a engineering thermoplastic with good dimensional stability and mechanical strength), continuous use at 3 bar and +76Â°C falls within the productâs rated limits and should not cause deformation or loss of flow when used as intended. Notes: long-term performance depends on actual operating conditions (continuous exposure duration, chemical compatibility with coolant, mechanical stresses, and installation quality). If your application includes higher pressures, higher temperatures, aggressive fluids, or prolonged thermal cycling, consider verifying with the manufacturer or testing under real-world conditions.

Is the Side nozzle for coolant, 1/4" system, LOC-LINEÂ® compatible with standard coolant fluids and oils used in machining?

Side nozzle for coolant, 1/4" system, LOC-LINEÂ® is made of acetal, rated to 3 bar and up to +76Â°C. Acetal (POM) is commonly compatible with many waterâbased coolants, soluble oils and light cutting fluids used in machining. It has good chemical resistance to oils and hydrocarbons but can be attacked by strong acids, alkalis and some aggressive solvents. Given the working pressure and temperature limits, the nozzle is suitable for typical machining coolants and oils when used within those bounds. For aggressive specialty fluids, elevated temperatures or pressures above 3 bar, confirm chemical compatibility with acetal or consult the fluid/supplier before use.

Does the Side nozzle for coolant, 1/4" system, LOC-LINEÂ® resist corrosion from coolants and cutting fluids?

Yes. The Side nozzle for coolant, 1/4" system, LOC-LINEÂ® is made of acetal (polyoxymethylene), a plastic known for good chemical resistance to many coolants and common cutting fluids. Within its specified operating limits. working pressure up to 3 bar and temperature up to +76Â°C. acetal resists degradation from typical water-based and soluble-oil machining coolants and most petroleum-based cutting fluids used in tooling operations. However, acetal can be attacked by strong acids, strong bases, and certain aggressive solvents; prolonged exposure to such chemicals or temperatures above the stated limit may reduce service life or cause swelling and embrittlement. For continuous use with atypical or highly aggressive fluids, compatibility testing or consulting the fluid and nozzle manufacturers is recommended.

Side nozzle for coolant, 1/4″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

Standard length [m]	10

Side nozzle for LOC-LINE® coolant – 1/4″ system. Enables the construction of, for example, a ring set. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-49443	Side round nozzle (1/4" system)	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Side nozzle for LOC-LINE® coolant – 1/4″ system. Enables the construction of, for example, a ring set. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.