Is the Straight air manifold 5xGW BSP with attachment, brass, type EW suitable for air systems up to 63 bar and temperatures from -10Â°C to +90Â°C?

Yes. Straight air manifold 5xGW BSP with attachment, brass, type EW is suitable for air systems up to 63 bar and for operating temperatures from â10Â°C to +90Â°C. The product description specifies BSP internal threads for air distribution, brass construction, a working pressure of up to 63 bar, and an operating temperature range of â10Â°C to +90Â°C, so it meets those requirements.

Can the Straight air manifold 5xGW BSP with attachment, brass, type EW be used with different air fittings or pipe materials?

Yes. The Straight air manifold 5xGW BSP with attachment, brass, type EW uses BSP internal threads, so it is compatible with other fittings and pipes that match BSP thread standards (same size and thread form). Because the body is brass, it can be connected to common materials such as brass, copper, steel, and many plastics; however, ensure compatible thread sealing (PTFE tape, suitable sealants, or compatible O-rings) and check for galvanic corrosion when mating dissimilar metals. Also verify that any alternative fittings and pipe materials meet the manifoldâs limits: working pressure up to 63 bar and operating temperature range â10Â°C to +90Â°C. If you change to push-fit or non-threaded connections, use appropriate adapters rated for the same pressure/temperature.

Does the Straight air manifold 5xGW BSP with attachment, brass, type EW require periodic maintenance or inspection for safe operation?

Yes. The Straight air manifold 5xGW BSP with attachment, brass, type EW requires periodic inspection and basic maintenance to ensure safe, reliable operation. Recommended points: - Visual inspection: check the manifold body, threads and attachment for signs of corrosion, cracks, deformation or damage before initial use and at regular intervals (depending on duty cycle and environment, typically monthly to quarterly). - Leak check: inspect all BSP internal thread connections and mating fittings for air leaks using soapy water or an electronic leak detector after installation and periodically, especially when system pressure or configuration changes. - Pressure and temperature limits: verify that operating pressure does not exceed 63 bar and that service temperature remains within -10Â°C to +90Â°C; inspect for evidence of exposure beyond these limits (discoloration, material distortion). - Thread and sealing maintenance: ensure threads are clean and undamaged; replace damaged seals, O-rings or thread tape/compound as needed when reassembling connections. - Fastening and attachment: confirm that any attached components or mounting hardware remain secure and free of excessive vibration or stress that could loosen connections. - Environmental considerations: in aggressive or corrosive environments perform more frequent inspections; although brass resists corrosion, contamination or chemicals can accelerate wear. - Functional testing: periodically cycle the manifold under normal working conditions and observe for performance issues, pressure drops or abnormal noises. Record inspections, findings and any maintenance performed. If any structural damage, persistent leaks or material degradation are found, take the manifold out of service and replace or repair it according to supplier recommendations.

Directional valve air straight 5xGW BSP with a bracket, brass, type EW

Additional information

Material	B – brass (bronze)

Directional valve straight with threads internal BSP with a bracket for distribution air. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-MS-12158	Air manifold straight 5 x 1/2" BSP female, with a bracket, brass	-	63	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Directional valve straight with threads internal BSP with a bracket for distribution air. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.