Is the SPEEDFIT connector cap, plastic suitable for continuous operation at 70Â°C and 7 bar in compressed air systems?

Yes. The SPEEDFIT connector cap, plastic is rated for continuous operation in compressed air systems at 70Â°C and up to 7 bar. The product specification lists a working pressure of 10 bar at +23Â°C and 7 bar at +70Â°C, with an operating temperature range from -20Â°C to +70Â°C, so running at 70Â°C/7 bar is within its declared limits. Notes: ensure installation follows manufacturer guidelines, avoid exposure beyond the stated temperature/pressure limits, and consider safety factors and local regulations for continuous high-temperature/high-pressure use.

Can the SPEEDFIT connector cap, plastic withstand short-term pressure spikes above 10 bar at 23Â°C in compressed air systems?

No - the SPEEDFIT connector cap, plastic is rated for a working pressure of 10 bar at +23Â°C. Short-term pressure spikes above that value exceed its specified working pressure and are not guaranteed safe. The material and datasheet specify 10 bar (+23Â°C) as the allowable limit; occasional overpressure may momentarily occur in practice, but the product was not designed or certified to withstand spikes above 10 bar, so using it under such conditions risks leakage, deformation or failure. For applications with expected transient spikes above 10 bar choose a component with a higher pressure rating or add pressure protection (e.g., relief valve).

Is the SPEEDFIT connector cap, plastic rated for use at -20Â°C in compressed air systems?

Yes. The SPEEDFIT connector cap, plastic is rated for use at â20Â°C in compressed air systems. The product specification lists an operating temperature range from â20Â°C to +70Â°C and a working pressure rating of 10 bar at +23Â°C (7 bar at +70Â°C), so it is suitable for compressed air service down to â20Â°C.

SPEEDFIT connector cap, plastic

All products, Pneumatic piping systems/

Additional information

Material	P – material (plastic)

End cap for the SPEEDFIT system used in compressed air installations. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JG-PM0812R	12 mm blind plug	-	-	In stock	Enquiry
JG-PM0815E	15 mm blind plug	-	-	In stock	Enquiry
JG-PM0818E	18 mm blind plug	-	-	In stock	Enquiry
JG-PM0822E	22 mm plug	-	-	In stock	Enquiry
JG-PM0828E	28 mm blind plug	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End cap for the SPEEDFIT system used in compressed air installations. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.