Can SPEEDFIT T-piece, plastic handle 10 bar at 23Â°C and 7 bar at 70Â°C for compressed air systems using plastic or metal pipes?

Yes. The SPEEDFIT T-piece, plastic is suitable for compressed air systems using either plastic or metal pipes (copper, brass, aluminum). It is made of plastic and rated for a working pressure of 10 bar at +23Â°C and 7 bar at +70Â°C, with an operating temperature range from â20Â°C to +70Â°C. Ensure system pressure and operating temperature stay within these limits for safe use.

Is the SPEEDFIT T-piece, plastic rated for 10 bar at 23Â°C and 7 bar at 70Â°C suitable for mixed plastic-to-metal compressed air lines?

Yes. The SPEEDFIT T-piece, plastic (rated 10 bar at 23Â°C and 7 bar at 70Â°C) is designed for compressed air installations using plastic or metal pipes (copper, brass, aluminum), so it is suitable for mixed plastic-to-metal lines provided operating pressures and temperatures do not exceed the stated limits (10 bar at 23Â°C, 7 bar at 70Â°C) and the system is installed per manufacturer instructions. Ensure compatible pipe sizes, correct fittings/sealing, and avoid pressure/temperature spikes or corrosive media. If in doubt for high-pressure, high-temperature, or critical safety applications, consult the manufacturer or use a metal fitting alternative.

Can SPEEDFIT T-piece, plastic withstand continuous operation at 7 bar and +70Â°C in compressed air systems?

Yes. The SPEEDFIT T-piece, plastic is specified for continuous operation in compressed air systems up to 10 bar at +23Â°C and up to 7 bar at +70Â°C, with an operating temperature range of -20Â°C to +70Â°C. Therefore it can withstand continuous operation at 7 bar and +70Â°C, provided the application stays within those stated limits and installation follows manufacturer guidelines.

A tee SPEEDFIT, plastic plastic

All products, Pneumatic piping systems/

Additional information

Material	P – material (plastic)

Coupling – A tee for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JG-PM0212E	Tee 12 mm	-	10	In stock	Enquiry
JG-PM0215E	Tee 15 mm	-	10	In stock	Enquiry
JG-PM0218E	Tee 18 mm	-	10	In stock	Enquiry
JG-PM0222E	Tee 22 mm	-	10	In stock	Enquiry
JG-PM0228E	Tee 28 mm	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Coupling – A tee for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.