Is the Pneumatic spiral polyurethane hose with quick couplings type 26KA suitable for outdoor use in temperatures down to -20Â°C?

Yes. The Pneumatic spiral polyurethane hose with quick couplings type 26KA Format is suitable for outdoor use down to â20Â°C. It is produced from highâquality etherâbased PUR that retains flexibility in harsh conditions, resists abrasion and brittleness, and is specified for an operating temperature range from â20Â°C to +70Â°C. Its spiral shape with shape memory, reinforced ends, swivel couplings and a reinforcing spring further support reliable outdoor performance at low temperatures.

Can the Pneumatic spiral polyurethane hose with quick couplings type 26KA withstand continuous exposure to UV and rain in outdoor industrial settings?

Yes. The Pneumatic spiral polyurethane hose with quick couplings type 26KA is designed for harsh industrial conditions and, being made from highâquality etherâbased PUR, retains flexibility, resists abrasion and brittleness, and resists adverse weather. Its shape memory preserves coil diameter over years, and reinforced ends with swivel quick couplings and a spring reduce mechanical stress. The stated operating temperature range (â20Â°C to +70Â°C) and explicit mention of resistance to adverse weather indicate suitability for continuous outdoor exposure to rain and UV; however, prolonged intense UV may slowly affect any polymer-if maximum UV longevity is critical, consider additional UV protection or periodic inspection.

Does the Pneumatic spiral polyurethane hose with quick couplings type 26KA resist oil and chemical splash in industrial environments?

Pneumatic spiral polyurethane hose with quick couplings type 26KA Format exhibits significant resistance to oil and chemical splash typical for many industrial environments, but with some practical limits. Why it resists: - Made from high-quality ether-based PUR, which offers good chemical resistance compared with many other elastomers and retains flexibility over time. - Excellent resistance to abrasion and brittleness, helping the outer surface withstand splashes, splatter and mechanical wear. - Operating temperature range (â20Â°C to +70Â°C) supports stability of material under normal industrial conditions. Limits and cautions: - PUR has good resistance to oils, hydraulic fluids and many chemicals, but it is not universally impervious. Strong solvents (e.g., concentrated ketones, aromatic hydrocarbons, strong acids or bases, chlorinated solvents) can attack PUR and shorten service life. - Resistance depends on concentration, temperature, exposure duration and specific chemical. brief splashes are more likely tolerated than continuous immersion or repeated heavy exposure. - Mechanical fittings (quick couplings, reinforcing spring areas) and any damage or abrasion can create vulnerability points to chemical ingress. Practical recommendation: For environments with occasional oil and common industrial chemical splashes, Pneumatic spiral polyurethane hose with quick couplings type 26KA Format is generally suitable. For exposure to aggressive solvents, concentrated acids/bases or continuous chemical contact, verify compatibility with the specific fluids (consult material-compatibility charts or supplier) or consider a hose material specifically rated for those chemicals.

Line pneumatic spiral polyurethane with quick coupling type 26KA

All products, Pneumatic hoses/

Additional information

Material	B – brass (bronze)
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-20
Vacuum resistance	no

Produced with high quality raw based on ether, retaining through long period time flexibility, hose spiral, giving for use in difficult conditions industrial. has memory shape, thanks to which po many years use Diameter coil remains unchanged. excellent for applications in applications, which require use hoses resistant to abrasion, brittleness and unfavourable conditions atmospheric. equipped in coupling swivel allowing on elimination stresses longitudinal hoses, during ich use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting fitted in quick coupling and plug type 26KA, of spring reinforcing. length working is 80-90% total length line. Hose material: light-blue polyurethane PUR. Working pressure: up to 12 bar (depending on the diameter hose). Operating temperature: od -20°C up to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RE-TBC26KK0805-05	Hose spiralny PU 8 x 5 mm, 5 mb, okuty RECTUS type 26	5	12	In stock	Enquiry
RE-TBC26KK0805-09	Hose spiralny PU 8 x 5 mm, 9 mb, okuty RECTUS type 26	5	12	In stock	Enquiry
RE-TBC26KK0805-15	Hose spiralny PU 8 x 5 mm, 15 mb, okuty RECTUS type 26	5	12	In stock	Enquiry
RE-TBC26KK1065-05	Hose spiralny PU 10 x 6.5 mm, 5 mb, okuty RECTUS type 26	6	9	In stock	Enquiry
RE-TBC26KK1065-09	Hose spiralny PU 10 x 6.5 mm, 9 mb, okuty RECTUS type 26	6	9	In stock	Enquiry
RE-TBC26KK1065-15	Hose spiralny PU 10 x 6.5 mm, 15 mb, okuty RECTUS type 26	6	9	In stock	Enquiry
RE-TBC26KK1208-05	Hose spiralny PU 12 x 8 mm, 5 mb, okuty RECTUS type 26	8	10	In stock	Enquiry
RE-TBC26KK1208-09	Hose spiralny PU 12 x 8 mm, 9 mb, okuty RECTUS type 26	8	10	In stock	Enquiry
RE-TBC26KK1208-12	Hose spiralny PU 12 x 8 mm, 12 mb, okuty RECTUS type 26	8	10	In stock	Enquiry
RE-TBC26KK1208-15	Hose spiralny PU 12 x 8 mm, 15 mb, okuty RECTUS type 26	8	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Produced with high quality raw based on ether, retaining through long period time flexibility, hose spiral, giving for use in difficult conditions industrial. has memory shape, thanks to which po many years use Diameter coil remains unchanged. excellent for applications in applications, which require use hoses resistant to abrasion, brittleness and unfavourable conditions atmospheric. equipped in coupling swivel allowing on elimination stresses longitudinal hoses, during ich use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting fitted in quick coupling and plug type 26KA, of spring reinforcing. length working is 80-90% total length line. Hose material: light-blue polyurethane PUR. Working pressure: up to 12 bar (depending on the diameter hose). Operating temperature: od -20°C up to +70°C.