Is the Straight end with BSPT male thread, polyamide suitable for use with both gases and liquids at pressures up to 10 bar?

Yes. The Straight end with BSPT male thread, polyamide is designed for use in control systems and installations for the transport of gases and liquids, and its specified working pressure is up to 10 bar. Constructed from polyamide (PA6), it is suitable for typical gaseous and liquid media within that pressure rating and in compatible environments (including vacuum systems as noted). Ensure media compatibility with PA6 (chemical resistance, temperature limits) and confirm thread/type match for your system; if aggressive chemicals, high temperatures, or regulatory gas-specific approvals are required, verify suitability with the manufacturer.

Can the Straight end with BSPT male thread, polyamide withstand vacuum conditions as well as positive pressures up to 10 bar?

Yes. Straight end with BSPT male thread, polyamide is designed for use in vacuum systems as well as for positive pressures up to 10 bar. Constructed from polyamide (PA6) and specified for installations transporting gases and liquids and for control/vacuum systems, it can withstand vacuum conditions and operate safely at working pressures up to 10 bar, provided installation and sealing are appropriate for the application.

Does the Straight end with BSPT male thread, polyamide require specific sealing tape or compound for BSPT threads?

Straight end with BSPT male thread, polyamide Format: Yes. BSPT (British Standard Pipe Taper) male threads are taper threads that require a thread seal to achieve a pressure-tight joint. Because the Straight end with BSPT male thread, polyamide is made of PA6 (polyamide) and is rated for service up to 10 bar, you should use a compatible sealing method that both seals the tapered metal/plastic joint and is chemically compatible with the media and the polyamide. Recommended options: - PTFE (Teflon) tape: Use PTFE tape suitable for pipe threads. Wrap the tape onto the male BSPT thread in the direction of tightening (clockwise looking at the end) for 2â4 wraps. PTFE tape is widely used, easy to apply, and acceptable for many gases and liquids at pressures up to 10 bar. - Thread sealant paste/compound: A liquid or paste thread sealant rated for BSPT and compatible with plastics and the transported media provides reliable sealing and can fill thread imperfections. Choose a non-hardening, removable sealant if disassembly is required. Precautions: - Avoid using anaerobic (hard-curing) sealants that can bond permanently unless permanent joints are acceptable. - Ensure any sealant is chemically compatible with PA6 and with the fluid or gas in the system. - Do not over-apply tape or compound so it extrudes into the flow path. - Tighten to the manufacturerâs recommended torque; over-tightening can damage polyamide threads. In summary: Yesâuse PTFE tape or a compatible thread sealant paste designed for BSPT and safe for polyamide and your media.

Straight end with BSPT male thread, polyamide

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Straight hose end, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NA-7100001004	Straight fitting DN 2.5 with GZ M8x1, hose 4 mm	4	-	In stock	Enquiry
NA-7100002004	Straight fitting DN 2.5 with GZ M8x1.25, hose 4 mm	4	-	In stock	Enquiry
NA-7100003004	Straight fitting DN 2.5 with GZ M10x1, hose 4 mm	4	-	In stock	Enquiry
NA-7100003006	Straight fitting DN 4 with GZ M10x1, hose 6 mm	6	-	In stock	Enquiry
NA-7100003008	Straight fitting DN 5.6 with GZ M10x1, hose 8 mm	8	-	In stock	Enquiry
NA-7100004004	Straight fitting DN 2.5 with GZ M12x1.5, hose 4 mm	4	-	In stock	Enquiry
NA-7100004005	Straight fitting DN 3 with GZ M12x1.5, hose 5 mm	5	-	In stock	Enquiry
NA-7100004006	Straight fitting DN 4 with GZ M12x1.5, hose 6 mm	6	-	In stock	Enquiry
NA-7100004008	Straight fitting DN 5.6 with GZ M12x1.5, hose 8 mm	8	-	In stock	Enquiry
NA-7100004010	Straight fitting DN 7 with GZ M12x1.5, hose 10 mm	10	-	In stock	Enquiry
NA-7100005004	Straight fitting DN 2.5 with GZ M14x1.5, hose 4 mm	4	-	In stock	Enquiry
NA-7100005005	Straight end DN 3 with GZ M14x1.5, hose 5 mm	5	-	In stock	Enquiry
NA-7100005006	Straight fitting DN 4 with GZ M14x1.5, hose 6 mm	6	-	In stock	Enquiry
NA-7100005008	Straight fitting DN 5.6 with GZ M14x1.5, hose 8 mm	8	-	In stock	Enquiry
NA-7100005010	Straight fitting DN 8 with GZ M14x1.5, hose 10 mm	10	-	In stock	Enquiry
NA-7100006010	Straight end DN 9 with GZ M16x1.5, hose 10 mm	10	-	In stock	Enquiry
NA-7100006012	Straight fitting DN 8.6 with GZ M16x1.5, hose 12 mm	12	-	In stock	Enquiry
NA-7100007008	Straight fitting DN 5.6 with GZ M18x1.5, hose 8 mm	8	-	In stock	Enquiry
NA-7100007012	Straight fitting DN 8.6 with GZ M18x1.5, hose 12 mm	12	-	In stock	Enquiry
NA-7100007014	Straight end DN 10 with GZ M18x1.5, hose 14 mm	14	-	In stock	Enquiry
NA-7100008014	Straight end DN 10 with GZ M20x1.5, hose 14 mm	14	-	In stock	Enquiry
NA-7100009008	Straight fitting DN 5.6 with GZ M26x1.5, hose 8 mm	8	-	In stock	Enquiry
NA-7100009012	Straight fitting DN 8.6 with GZ M26x1.5, hose 12 mm	12	-	In stock	Enquiry
NA-7100009016	Straight end DN 12 with GZ M26x1.5, hose 16 mm	16	-	In stock	Enquiry
NA-7100009019	Straight end DN 15 with GZ M26x1.5, hose 19 mm	20	-	In stock	Enquiry
NA-7100010004	Straight fitting DN 2.5 with G1/8" BSPT, hose 4 mm	4	-	In stock	Enquiry
NA-7100010006	Straight end DN 4 with GZ 1/8" BSPT, hose 6 mm	6	-	In stock	Enquiry
NA-7100010008	Straight fitting DN 5.6 with GZ 1/8" BSPT, hose 8 mm	8	-	In stock	Enquiry
NA-7100011004	Straight end DN 2.5 with GZ 1/4" BSPT, hose 4 mm	4	-	In stock	Enquiry
NA-7100011005	Straight end DN 3 with GZ 1/4" BSPT, hose 5 mm	5	-	In stock	Enquiry
NA-7100011006	Straight end DN 4 with GZ 1/4" BSPT, hose 6 mm	6	-	In stock	Enquiry
NA-7100011008	Straight end DN 5.6 with GZ 1/4" BSPT, hose 8 mm	8	-	In stock	Enquiry
NA-7100011010	Straight end DN 10 with GZ 1/4" BSPT, hose 10 mm	10	-	In stock	Enquiry
NA-7100012006	Straight end DN 4 with GZ 3/8" BSPT, hose 6 mm	6	-	In stock	Enquiry
NA-7100012008	Straight end DN 5.6 with GZ 3/8" BSPT, hose 8 mm	8	-	In stock	Enquiry
NA-7100012010	Straight end DN 11 with GZ 3/8" BSPT, hose 10 mm	10	-	In stock	Enquiry
NA-7100012012	Straight fitting DN 8.6 with GZ 3/8" BSPT, hose 12 mm	12	-	In stock	Enquiry
NA-7100012014	Straight end DN 10 with GZ 3/8" BSPT, hose 14 mm	14	-	In stock	Enquiry
NA-7100013008	Straight end DN 5.6 with GZ 1/2" BSPT, hose 8 mm	8	-	In stock	Enquiry
NA-7100013012	Straight fitting DN 8.6 with GZ 1/2" BSPT, hose 12 mm	12	-	In stock	Enquiry
NA-7100013014	Straight end DN 10 with GZ 1/2" BSPT, hose 14 mm	14	-	In stock	Enquiry
NA-7100013016	Straight end DN 12 with GZ 1/2" BSPT, hose 16 mm	16	-	In stock	Enquiry
NA-7100014016	Straight end DN 12 with GZ 3/4" BSPT, hose 16 mm	16	-	In stock	Enquiry
NA-7100014019	Straight end DN 15 with GZ 3/4" BSPT, hose 19 mm	20	-	In stock	Enquiry
NA-7100015025	Straight end DN 21 with GZ 1" BSPT, hose 25 mm	25	-	In stock	Enquiry
NA-7100019014	Straight end DN 10 with GZ M22x1.5, hose 14 mm	14	-	In stock	Enquiry
NA-7100049008	Straight fitting DN 5.6 with GZ M22x1.5, hose 8 mm	8	-	In stock	Enquiry
NA-7100049012	Straight fitting DN 8.6 with GZ M22x1.5, hose 12 mm	12	-	In stock	Enquiry
NA-7100052003	Straight end DN 2.5 with GZ M5, hose 3 mm	3	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight hose end, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).