Is the Straight manometer connection with female thread and measuring hose connection available in both rotating-nut (metric/BSPT) and fixed-nut (NPTF/BSPT) variants, and which seals are used?

Yes. The Straight manometer connection with female thread and measuring hose connection Format is offered in both variants: - Rotating-nut variant: metric and BSPT threads; sealed with an NBR O-ring. - Fixed-nut variant: NPTF and BSPT threads; (uses the fixedânut sealing appropriate for those thread types). Material: steel with zincânickel coating. Working pressure: 500 bar or 630 bar depending on hose size. Operating temperature: -30Â°C to +120Â°C.

Does the Straight manometer connection with female thread and measuring hose connection support 500 bar and 630 bar working pressures depending on hose size?

Yes. The Straight manometer connection with female thread and measuring hose connection Format supports working pressures of 500 bar or 630 bar depending on the hose size, as stated in the product description. It is made of steel with zinc-nickel coating, available with either a rotating nut (metric and BSPT thread, NBR O-ring) or a fixed nut (NPTF and BSPT thread), and is designed for micro hoses with a clamping sleeve. Operating temperature range: -30Â°C to +120Â°C.

Can the Straight manometer connection with female thread and measuring hose connection be used with micro hoses and a clamping sleeve?

Yes. The Straight manometer connection with female thread and measuring hose connection Format is designed specifically for micro hoses and is supplied complete with a clamping sleeve. It is offered in two variants (rotating nut with metric or BSPT thread and NBR Oâring; fixed nut with NPTF or BSPT thread), made of steel with zincânickel coating. Its working pressure (500 or 630 bar depending on hose size) and operating temperature range (â30 Â°C to +120 Â°C) make it suitable for typical microâhose applications when used with the appropriate hose size and clamping sleeve. Ensure you choose the correct variant and hose diameter to match the stated pressure rating and thread type.

Straight manometer connection with female thread and measuring hose connection

Additional information

Material	CS – steel (cast iron)

Connection for a pressure gauge with internal thread and end designed for micro hoses, complete with a clamping sleeve. The connection is available in two variants: with a rotating nut (with metric and BSPT thread, NBR O-ring seal) and with a fixed nut (with NPTF and BSPT thread). Material: steel with zinc-nickel coating. Working pressure: 500 bar or 630 bar – depending on the hose size. Operating temperature: from -30°C to +120°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-801-50-020-00	End. manometric GW M20x1.5, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-801-50-204-00	End. manometric GW 1/4" BSP, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-801-50-204-10	End. manometric GW 1/4" BSP, hose 2x5 mm, with sleeve, short nut	2	630	In stock	Enquiry
PS-801-50-208-00	End. manometric GW 1/2" BSP, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-801-50-304-00	End. manometric GW 1/4"-18 NPTF fixed, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-801-52-204-00	End. manometric GW 1/4" BSPT fixed, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-804-50-204-00	End. manometric GW 1/4" BSP, hose 4x8 mm, with sleeve	4	500	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Connection for a pressure gauge with internal thread and end designed for micro hoses, complete with a clamping sleeve. The connection is available in two variants: with a rotating nut (with metric and BSPT thread, NBR O-ring seal) and with a fixed nut (with NPTF and BSPT thread). Material: steel with zinc-nickel coating. Working pressure: 500 bar or 630 bar – depending on the hose size. Operating temperature: from -30°C to +120°C.