Strong suction and discharge hose with an inner layer made of chemically resistant ultra-high molecular weight polyethylene (UPE, UHMWPE). The inner layer of UPE is resistant to most aggressive chemicals, antistatic (R<10⁶Ω), compliant with food hose requirements, smooth, with a low friction coefficient during flow, preventing medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries. Reinforced with synthetic cord and steel spirals. The outer layer is made of chemically resistant EPDM rubber, antistatic (R<10⁶Ω), abrasion-resistant, ozone-resistant, weather-resistant, and fire-resistant. Compliant with EN 12115:11 type Ω/T requirements, fully antistatic – ensures the dissipation of electrostatic charges through the hose walls (R<10⁹Ω). This enables the use of the hose in explosion hazard zones. The hose is widely used for various applications in the chemical industry. Standards and requirements: Chemical hoses: EN 12115:2011 (type Ω/T). Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulated fluids A, B, C, D2). Installation: use smooth fittings with a spigot (“tail” to the hose) without sharp or high ribs that could cut or damage the inner layer of UPE when tightened. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Installation with clamp sleeves or band clamps. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: black UPE polyethylene. Reinforcement: textile cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +100°C.