Is the Rubber hose for light chemicals MP 20 safe for use with water-based and glycol-based coolants?

Yes. Rubber hose for light chemicals MP 20 is safe for use with water-based and glycol-based coolants. The hose is specifically designed for air, water, and light chemicals including glycol-based coolants. Its inner black EPDM rubber is compatible with water and glycols, and the hose is rated for temperatures from -40Â°C to +120Â°C (temporarily up to +140Â°C). Ensure working conditions (pressure, temperature, and any additives) stay within the hoseâs specifications and avoid oils, fuels, aromatic hydrocarbons, and other incompatible media.

Can Rubber hose for light chemicals MP 20 be used with acetone and ketone-based paints?

Rubber hose for light chemicals MP 20 Format can be used with acetone and ketone-based paints. The hose is designed for light chemicals including acetone and ketones and is stated suitable for various water-soluble paints and those based on ketones and esters. It is not suitable for cellulose paints, chlorinated rubber, or paints/solvents containing aromatic hydrocarbons (e.g., toluene, xylene) or gasoline, nor for oils and fuels. Ensure application temperatures stay within the hose rating (â40Â°C to +120Â°C, temporarily up to +140Â°C) and confirm compatibility with specific paint formulations if additives or solvents beyond simple ketones are present.

Can Rubber hose for light chemicals MP 20 be safely used with concentrated acids or only with diluted acids?

Rubber hose for light chemicals MP 20 should be used only with diluted acids, not with concentrated acids. Opis wskazuje wyraÅºnie, Å¼e wÄÅ¼e sÄ przeznaczone do lekkich chemikaliÃ³w: non-oxidizing, diluted acids (np. kwas solny i siarkowy) oraz rozcieÅczone zasady i roztwory soli. MateriaÅ (EPDM) i konstrukcja zapewniajÄ odpornoÅÄ na wiele wodnych i ketonowych rozpuszczalnikÃ³w, ale nie sÄ rekomendowane do olejÃ³w, paliw, aromatycznych wÄglowodorÃ³w ani agresywnych, koncentrowanych reagentÃ³w. Dlatego nie stosowaÄ z kwaÅnymi roztworami w stanie stÄÅ¼onym.

Hose rubber for light chemicals MP 20

All products, Chemical hoses/

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100, 20, 50
Reinforcement	textile braid

Hose delivery, very flexible, resistant na aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (np. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants na base glycols. Nie is suitable for oils, fuels, carbon aromatic. can be used for various paints water-soluble and na base ketones and esters. Nie is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black rubber EPDM. Reinforcement: single or double (DN 32÷38) braid textile spiral. Outer layer: black rubber EPDM. temperature use: from -40°C to +120°C (momentarily up to +140°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SP-MP20-06	Hose MP 20-PAINT SPRAY 6x13 mm	6	20	In stock	Enquiry
SP-MP20-08	Hose MP 20-PAINT SPRAY 8x15 mm	8	20	In stock	Enquiry
SP-MP20-10	Hose MP 20-PAINT SPRAY 10x17 mm	10	20	In stock	Enquiry
SP-MP20-13	Hose MP 20-PAINT SPRAY 13x21 mm	12	20	In stock	Enquiry
SP-MP20-16	Hose MP 20-PAINT SPRAY 16x24 mm	16	20	In stock	Enquiry
SP-MP20-19	Hose MP 20-PAINT SPRAY 19x28 mm	20	20	In stock	Enquiry
SP-MP20-25	Hose MP 20-PAINT SPRAY 25x35 mm	25	20	In stock	Enquiry
SP-MP20-32	Hose MP 20-PAINT SPRAY 32x44 mm	32	20	In stock	Enquiry
SP-MP20-38	Hose MP 20-PAINT SPRAY 38x50 mm	38	20	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose delivery, very flexible, resistant na aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (np. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants na base glycols. Nie is suitable for oils, fuels, carbon aromatic. can be used for various paints water-soluble and na base ketones and esters. Nie is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black rubber EPDM. Reinforcement: single or double (DN 32÷38) braid textile spiral. Outer layer: black rubber EPDM. temperature use: from -40°C to +120°C (momentarily up to +140°C).

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100, 20, 50
Reinforcement	textile braid