Can the T end with BSPT male thread, polyamide withstand continuous operation at 10 bar in pneumatic control systems?

Yes . the T end with BSPT male thread, polyamide Format is rated for continuous operation up to 10 bar in pneumatic control systems, according to the provided specification. The fitting is explicitly designed for control systems and installations for the transport of gases and liquids, with a stated working pressure up to 10 bar and material polyamide (PA6). However, for reliable continuous use keep in mind: - Confirm system temperature, chemical compatibility and any pressure spikes: PA6 performance can degrade at elevated temperatures or with aggressive media; intermittent overpressures above 10 bar may cause failure. - Ensure proper thread sealing for BSPT male connection (tapered thread requires suitable sealing method like PTFE tape or sealant applied per manufacturer recommendations). - Consider dynamic loads, vibration, and cyclic pressure: prolonged cyclic stress may reduce life versus static conditions. - Follow manufacturer installation torque and avoid mechanical overload on the polyamide body. If all operating conditions (pressure â¤10 bar, compatible media, permitted temperature range, correct assembly) are met, the T end with BSPT male thread, polyamide Format is suitable for continuous operation in pneumatic control systems.

Is the T end with BSPT male thread, polyamide compatible with oxygen-rich or aggressive gas media?

No. The "T" end with BSPT male thread, polyamide is not suitable for oxygen-rich or aggressive gas media. Polyamide (PA6) can be compatible with air, inert gases and many liquids up to 10 bar, but it is generally not recommended for oxygen-enriched atmospheres or aggressive/oxidizing gases due to risk of polymer degradation, embrittlement and increased fire/combustion hazard. For oxygen service or aggressive gases use fittings and materials specifically certified for oxygen compatibility (e.g., certain metals or specially qualified polymers) and follow applicable standards and safety guidelines.

Is the "T" end with BSPT male thread, polyamide suitable for use in vacuum systems down to -0.9 bar?

Yes. The "T" end with BSPT male thread, polyamide is suitable for vacuum service down to -0.9 bar. The product description explicitly lists vacuum systems among intended applications and specifies a working pressure up to 10 bar; polyamide (PA6) fittings commonly tolerate full vacuum when properly assembled and sealed. Ensure correct thread sealing for BSPT (tapered) connections and verify assembly procedures and any temperature or chemical compatibility limits for your specific vacuum conditions.

“T” end with BSPT male thread, polyamide

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

T-end fitting for hose, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NA-7200001004	T-branch DN2.5 with GZ M8x1, hose 4 mm	4	10	In stock	Enquiry
NA-7200003004	T-branch DN2.5 with GZ M10x1, hose 4 mm	4	10	In stock	Enquiry
NA-7200003006	T-branch DN4 with GZ M10x1, hose 6 mm	6	10	In stock	Enquiry
NA-7200004004	T-branch DN2.9 with GZ M12x1.5, 4 mm hose	4	10	In stock	Enquiry
NA-7200004006	T-branch DN4 with GZ M12x1.5, hose 6 mm	6	10	In stock	Enquiry
NA-7200004008	T-branch DN5.6 with GZ M12x1.5, hose 8 mm	8	10	In stock	Enquiry
NA-7200005004	T-branch DN2.5 with GZ M14x1.5, hose 4 mm	4	10	In stock	Enquiry
NA-7200005008	T-branch DN5.6 with GZ M14x1.5, hose 8 mm	8	10	In stock	Enquiry
NA-7200010004	T-branch DN2.5 with GZ 1/8" BSPT, hose 4 mm	4	10	In stock	Enquiry
NA-7200010006	T-branch DN4 with GZ 1/8" BSPT, hose 6 mm	6	10	In stock	Enquiry
NA-7200011004	T-branch DN2.5 with GZ 1/4" BSPT, hose 4 mm	4	10	In stock	Enquiry
NA-7200011006	T-branch DN4 with GZ 1/4" BSPT, hose 6 mm	6	10	In stock	Enquiry
NA-7200011008	Tee "T" DN5.6 with GZ 1/4" BSPT, hose 8 mm	8	10	In stock	Enquiry
NA-7200012010	T-branch DN7 with GZ 3/8" BSPT, hose 10 mm	10	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

T-end fitting for hose, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).