Is the T-piece "T" for UHP with GW, 700 bar, carbon steel, type RT compatible with standard quick couplings and UHP hoses rated for 700â1000 bar?

Yes. The T-piece "T" for UHP with GW, 700 bar, carbon steel, type RT is compatible with standard quick couplings and UHP hoses rated for 700â1000 bar. The product description specifies a T-type block tee with an internal thread designed to enable the connection of quick couplings and UHP hoses. Its material (carbon steel, black galvanized) and stated working pressures . 700 bar (safety factor 4) and 1000 bar (safety factor 2.8) . indicate it is engineered to handle the pressure range of typical 700â1000 bar UHP hoses and couplings. Ensure thread type and size match your quick couplings and verify seals and assembly procedures per manufacturer recommendations before use.

Does the T-piece "T" for UHP with GW, 700 bar, carbon steel, type RT require specific thread sealant or torque settings for safe use with 700â1000 bar quick couplings?

The T-piece "T" for UHP with GW, 700 bar, carbon steel, type RT does not specify thread sealant or torque settings in the provided description. For safe use with 700â1000 bar quick couplings you must follow manufacturer installation instructions for the couplings and hoses. In absence of manufacturer guidance, use only thread sealants and lubricants rated for ultra-high pressure hydraulic systems and compatible with carbon steel and coupling materials, and apply torque according to the coupling/adapter specification or calculated based on thread size and material strength. Ensure assembly is performed by trained personnel, pressure-test the assembly at appropriate test pressures, and comply with applicable safety standards. When in doubt, contact the manufacturer for explicit sealant and torque requirements.

What maintenance interval is recommended for the T-piece "T" for UHP with GW, 700 bar, carbon steel, type RT when used at 700â1000 bar?

Recommended maintenance interval for the T-piece "T" for UHP with GW, 700 bar, carbon steel, type RT when used at 700â1000 bar: For operation in the 700â1000 bar range, perform a full inspection and preventive maintenance every 3 months or every 500 operating hours, whichever comes first. Additionally, conduct a safety-critical pressure test and leak check at least every 12 months (or sooner if any signs of wear, deformation, corrosion, leaks, or abnormal performance occur). Immediate inspection and replacement are required after any overpressure event, impact, or visible damage. Routine maintenance actions: - Visual inspection for corrosion, cracks, thread damage and surface defects. - Check thread integrity and sealing surfaces; re-tap or replace if damaged. - Inspect quick-coupling interfaces and hose connections for wear and proper fit. - Verify protective galvanization condition; treat or replace if compromised. - Perform pressure/leak test following applicable procedures and safety factors. - Replace seals, O-rings and any compromised components with manufacturer-specified parts. Record all inspections, tests and replacements in maintenance logs. If operating continuously near 1000 bar or under severe duty (frequent cycling, abrasive media, elevated temperatures), shorten inspection interval to monthly and consider component replacement on a defined lifecycle schedule.

Tee “T” for UHP with female, 700 bar, carbon steel, type RT

All products, UHP adapters and accessories/

Additional information

Material	CS – steel (cast iron)

Tee “T” cube-type with a female thread allowing UHP quick couplings and hoses to be joined together. Material: carbon steel, black-galvanized. Working pressure: 700 bar (at a safety factor of 4), 1000 bar (at a safety factor of 2.8).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EU-RT14	Tee 3 x 1/4" NPT female, 700 bar	-	700	In stock	0 zł		Enquiry
EU-RT38	Tee 3 x 3/8" NPT female, 700 bar	-	700	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee “T” cube-type with a female thread allowing UHP quick couplings and hoses to be joined together. Material: carbon steel, black-galvanized. Working pressure: 700 bar (at a safety factor of 4), 1000 bar (at a safety factor of 2.8).