Is the "T" plug tee, stainless steel, AI-60230 compatible with food and pharmaceutical applications given its AISI 316L construction and Viton seals?

Based on the provided description, the "T" plug tee, stainless steel, AI-60230 appears suitable for many food and pharmaceutical applications, but with important qualifications. Reasons supporting compatibility: - Construction from AISI 316L stainless steel: 316L is widely accepted in food and pharmaceutical industries for its corrosion resistance, low carbon content (reducing sensitization), and good cleanability. - No plastic components: Minimizes contamination risk from non-metallic parts. - Viton seals: Chemically resistant and able to handle a broad temperature range (â15Â°C to +225Â°C), suitable for many process conditions. - Intended use stated: Manufacturer lists chemical, food, pharmaceutical, electronic industries, and medicine. Caveats and actions required before use: - Viton (FKM) is widely used but is not universally accepted for all pharmaceutical or food contact uses.its suitability depends on specific regulatory requirements, chemical exposure (e.g., strong oxidizers, steam sterilization), and leachables/extractables profiles. - Cleanability and surface finish (e.g., Ra value, electropolishing) are not specified; these are critical for hygienic/pharmaceutical applications. - Regulatory certifications (e.g., FDA food contact compliance, USP Class VI, EC 1935/2004, or specific customer/industry approvals) are not stated and must be confirmed. - Sterilization compatibility (autoclave, CIP/SIP conditions) should be verified for both 316L finish and Viton seals. Conclusion: The "T" plug tee, stainless steel, AI-60230 has materials and stated uses that make it a strong candidate for food and pharmaceutical applications, but final acceptance requires confirmation of surface finish, applicable regulatory certifications, sterilization compatibility, and suitability of Viton for the specific process chemistry.

Can the "T" plug tee, stainless steel, AI-60230 withstand prolonged exposure to concentrated acids and solvents?

The "T" plug tee, stainless steel, AI-60230 offers very good resistance to many corrosive agents: it is made entirely of AISI 316L (a highly corrosion-resistant stainless steel) and uses Viton seals, which provide strong chemical resistance. It is suitable for use in chemical, food, pharmaceutical, electronic and medical applications and can operate from -15Â°C to +225Â°C, up to 15 bar and near-vacuum conditions. However, prolonged exposure to highly concentrated acids or aggressive solvents can still attack AISI 316L or Viton depending on concentration, temperature and specific chemical (e.g., strong chlorides, hot sulfuric or hydrofluoric acids, some ketones/esters). For guaranteed long-term compatibility, consult chemical-resistance data for AISI 316L and Viton versus the specific chemicals, concentrations and temperatures you plan to use, or perform compatibility testing.

Does the "T" plug tee, stainless steel, AI-60230 require special maintenance after exposure to high temperatures or chemicals?

The "T" plug tee, stainless steel, AI-60230 does not require special maintenance beyond standard good-practice inspection and care after exposure to high temperatures or chemicals, thanks to its AISI 316L construction and Viton seals. Recommended actions: - Inspect visually and functionally: check for discoloration, pitting, deformation, or compromised threads after extreme temperature or aggressive-chemical exposure. - Check seals: Viton is highly chemical- and heat-resistant (service up to +225Â°C), but inspect for hardening, cracking, swelling, or loss of elasticity and replace seals if any degradation is found. - Clean appropriately: remove residues with compatible cleaners (avoid strong bases or solvents that attack Viton or surface finish). Use mild detergents or recommended solvents for stainless steel and rinse thoroughly. - Corrosion check: AISI 316L resists most corrosive agents, but inspect for localized corrosion if exposed to chlorides or particularly aggressive media; if corrosion is present, evaluate suitability and consider replacement. - Re-lubricate threads if applicable with a lubricant compatible with Viton and stainless steel and the process media. - Pressure and vacuum test: perform a leak/pressure test after maintenance or seal replacement to ensure integrity up to specified working pressure (15 bar) and vacuum (0.99 bar). If used routinely above specified limits or in unusually aggressive environments, increase inspection frequency and consider preventive seal replacement.

“T” plug tee, stainless steel, AI-60230

All products, Push-in fittings/

Additional information

Material	SS – stainless steel

High-quality “T” branch coupling, made entirely of AISI 316L steel, series 60230. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AI-60230-04	Tee fitting, 4 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60230-06	Tee fitting, 6 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60230-08	Tee fitting, 8 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60230-10	Tee fitting, 10 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60230-12	Tee fitting, 12 mm hose, AISI 316L	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality “T” branch coupling, made entirely of AISI 316L steel, series 60230. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.