Is the Plug tee "T" adjustable with male thread, type R16 suitable for use with oxygen or other reactive gases?

No. The Plug tee "T" adjustable with male thread, type R16 is specified for vacuum and air only and uses nickelâplated brass with NBR (nitrile) seals. It is not rated for oxygen or other reactive gases. NBR is not oxygenâcompatible and can pose safety risks (degradation, combustion) with highâpressure oxygen; nickelâplated brass may also not meet oxygenâservice cleanliness and compatibility requirements. For oxygen or reactive gas service you must use components specifically certified for oxygen use (oxygenâcleaned, oxygenâcompatible materials and seals such as PTFE or specially rated elastomers) and follow applicable standards.

Can Plug tee "T" adjustable with male thread, type R16 be used with food-grade gases or in food processing applications?

Plug tee "T" adjustable with male thread, type R16 should not be considered suitable for food-grade gases or direct use in food processing. Description specifies material as nickel-plated brass, sealing as NBR, and working medium limited to vacuum and air; there is no mention of food-grade certification (e.g., FDA, EU 1935/2004, NSF) or suitability for food/medical gases. Nickel plating and standard NBR seals can leach contaminants or degrade with certain food-related media and cleaning agents. For food applications, use components explicitly rated for food contact (approved materials, compatible elastomers such as FDA/EPDM/VMQ as required) and with appropriate certificates.

Can Plug tee "T" adjustable with male thread, type R16 be used with corrosive or chemically aggressive gases?

Plug tee "T" adjustable with male thread, type R16 is specified for vacuum and air, made of nickel-plated brass, sealed with NBR (nitrile rubber) and rated for -20Â°C to +80Â°C and up to 16 bar. Based on this description, it is not suitable for use with corrosive or chemically aggressive gases. Reasoning: - Material: Nickel-plated brass offers limited corrosion resistance; many aggressive gases (acidic, halogenated, ammonia, hydrogen sulfide, chlorine, etc.) will attack brass or damage the nickel plating over time. - Seal: NBR is generally resistant to oils and some nonpolar chemicals but degrades with many aggressive chemicals, strong oxidizers, ketones, esters, chlorinated hydrocarbons and certain acids/alkalis. Chemically aggressive gases can permeate or chemically attack NBR, causing loss of sealing. - Intended media: Manufacturer lists vacuum and air only, which implies the part was not designed or tested for corrosive chemical service. If you need to handle corrosive or chemically aggressive gases, choose components specifically rated for those gases: materials like stainless steel, Hastelloy, PTFE or other chemically resistant alloys/polymers, and seals such as FFKM (perfluoroelastomer) or PTFE, with appropriate certification and compatibility testing. Conclusion: Do not use Plug tee "T" adjustable with male thread, type R16 with corrosive or chemically aggressive gases unless the manufacturer explicitly confirms compatibility for the specific gas and conditions.

Plug tee “T” adjustable with male thread, type R16

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Adjustable “T” plug connector with external thread, type R16, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
MW-2015003	Adjustable T-connector R16 hose 5 mm GZ M5	-	16
MW-2015004	Adjustable T-connector R16 hose 5 mm GZ BSP 1/8"	-	16
MW-2015010	Adjustable T-connector RL16 hose 12 mm GZ BSP 1/4"	-	16
MW-2015011	Adjustable T-connector RL16 hose 12 mm GZ BSP 3/8"	-	16
MW-2015012	Adjustable T-connector RL16 hose 12 mm GZ BSP 1/2"	-	16
MW-2L15001	Adjustable T-connector RL16 hose 4 mm GZ M5	-	16
MW-2L15002	Adjustable T-connector RL16 hose 4 mm GZ BSP 1/8"	-	16
MW-2L15005	Adjustable T-connector RL16 hose 6 mm GZ BSP 1/8"	-	16
MW-2L15006	Adjustable T-connector RL16 hose 8 mm GZ BSP 1/8"	-	16
MW-2L15007	Adjustable T-connector RL16 hose 6 mm GZ BSP 1/4"	-	16
MW-2L15008	Adjustable T-connector RL16 hose 8 mm GZ BSP 1/4"	-	16
MW-2L15009	Adjustable T-connector RL16 hose 10 mm GZ BSP 1/4"	-	16
MW-2L15013	Adjustable T-connector RL16 hose 8 mm GZ BSP 3/8"	-	16
MW-2L15014	Adjustable T-connector RL16 hose 10 mm GZ BSP 3/8"	-	16
MW-2L15020	Adjustable T-connector RL16 hose 4 mm GZ M7	-	16
MW-2L15021	Adjustable T-connector RL16 hose 6 mm GZ M7	-	16
MW-2L15106	Adjustable T-connector RL16 hose 6 mm GZ M5	-	16

Adjustable “T” plug connector with external thread, type R16, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.