Is the T-piece for coolant distribution system, 1/2" system, JETON compatible with fluids at up to +65Â°C and safe at working pressures up to 2 bar?

Yes. The T-piece for coolant distribution system, 1/2" system, JETON is made of acetal and is specified for an operating temperature up to +65Â°C and a working pressure up to 2 bar, so it is compatible with fluids at temperatures up to +65Â°C and safe for use at working pressures up to 2 bar.

Can the T-piece for coolant distribution system, 1/2" system, JETON be used with various coolants and fittings at pressures up to 2 bar?

Yes. The T-piece for coolant distribution system, 1/2" system, JETON can be used with various coolants and fittings at pressures up to 2 bar, provided the fluids and connectors are compatible with acetal (POM) and the operating temperature does not exceed +65Â°C. Confirm chemical compatibility of specific coolants and that connected fittings and seals are rated for the same pressure and temperature to ensure safe, leak-free operation.

Does the T-piece for coolant distribution system, 1/2" system, JETON resist chemical additives in coolants at up to 2 bar?

The description for T-piece for coolant distribution system, 1/2" system, JETON (Material: acetal; Working pressure: up to 2 bar; Operating temperature: up to +65Â°C) does not explicitly state chemical resistance to coolant additives. However, acetal (POM) generally has good resistance to many diluted glycol-based coolants and common corrosion inhibitors at temperatures below ~65Â°C and pressures up to 2 bar. It is less resistant to strong acids, strong bases, and some chlorinated or aromatic hydrocarbons and certain aggressive additives. Therefore: T-piece for coolant distribution system, 1/2" system, JETON will likely tolerate typical coolant additives used in engine and industrial cooling (e.g., ethylene glycol/propylene glycol with standard inhibitor packages) under the stated temperature and pressure, but its compatibility with specific chemical additives cannot be guaranteed from the given description. For reliable use, verify compatibility against the exact coolant formulation (manufacturerâs chemical resistance data for acetal) or request a chemical compatibility statement from the supplier.

T-piece for coolant distribution system, 1/2″ system, JETON

Air and water hoses, All products/

Additional information

Material	P – material (plastic)

Tee fitting for creating a coolant distribution system – 1/2″ system. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-64626	Tee for distribution system (1/2" system)	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee fitting for creating a coolant distribution system – 1/2″ system. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.