The HYPERLINE V (VISIFLON) hose is made of high-quality spiral corrugated PTFE, providing exceptional flexibility, elasticity, and vibration resistance among Teflon hoses. Like any Teflon hose, due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, minimal surface adhesion), the VISIFLON hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. In cases where there is a risk of static electricity (danger of charge generation and accumulation), VISIFLON hoses made of antistatic Teflon – the antistatic version AS – should be used. Antistatic Teflon is black (contains appropriately distributed graphite in PTFE) and has a resistance of R<10⁸Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The selection of the hose in the standard version made of natural PTFE or in the antistatic version should be confirmed with Tubes International. The SS version braid is made of annealed AISI 304 stainless steel wire and provides high pressure resistance. At operating temperatures above +130°C, the maximum working pressure should be reduced by 1% for every 1°C increase in temperature. Available versions of the inner layer: standard (natural white) and antistatic (black). Hose material: spiral corrugated PTFE (Teflon). Reinforcement: AISI 304 steel braid. Working pressure: from 20 bar to 60 bar – depending on the hose diameter. Operating temperature: from -70°C to +230°C. Resistant to full vacuum up to a temperature of: +130°C.