Is the Thermoplastic hose with double aramid braid OL8 MARINE suitable for continuous use in saline marine environments and resistant to UV and oil exposure?

Thermoplastic hose with double aramid braid OL8 MARINE is suitable for continuous use in saline marine environments: yes. Produkt opisuje lekkÄ, elastycznÄ wÄÅ¼Ä zaprojektowanÄ do pracy w wysokiej wilgotnoÅci i zasolonym powietrzu, a zgodnoÅÄ ze standardami SAE 100R8 i ISO 3949-R8 oraz zastosowanie podwÃ³jnego oplotu aramidowego potwierdzajÄ odpornoÅÄ konstrukcji na korozjÄ i mechaniczne obciÄÅ¼enia typowe dla warunkÃ³w morskich. OdpornoÅÄ na UV: ograniczona. ZewnÄtrzna warstwa z mikro-perforowanego poliuretanu oferuje dobrÄ odpornoÅÄ na promieniowanie UV w porÃ³wnaniu z wieloma gumowymi pÅaszczami, lecz dÅugotrwaÅa ekspozycja na silne UV moÅ¼e stopniowo wpÅynÄÄ na wÅaÅciwoÅci powierzchniowe. Dla ciÄgÅego, silnego nasÅonecznienia zalecane sÄ okresowe inspekcje oraz rozwaÅ¼enie dodatkowej ochrony (osÅony przeciwsÅonecznej lub maskowania). OdpornoÅÄ na olej: dobra dla zastosowaÅ hydraulicznych. WÄÅ¼ jest przeznaczony do instalacji z olejami hydraulicznymi i paliwami, a poliuretanowy pÅaszcz i aramidowe wzmocnienie zapewniajÄ kompatybilnoÅÄ z olejami i odpornoÅÄ na ich dziaÅanie. NaleÅ¼y jednak zweryfikowaÄ zgodnoÅÄ z konkretnym typem oleju (np. syntetyczne, o specyficznych dodatkach) u producenta. Temperaturowe i ciÅnieniowe ograniczenia: praca od -40Â°C do +100Â°C (dla wody i powietrza do +70Â°C) oraz ciÅnienia robocze 165â350 bar w zaleÅ¼noÅci od Årednicy . upewnij siÄ, Å¼e warunki eksploatacji mieszczÄ siÄ w tych parametrach. Podsumowanie: Thermoplastic hose with double aramid braid OL8 MARINE jest odpowiedni do ciÄgÅego stosowania w Årodowisku morskim i wykazuje dobrÄ odpornoÅÄ na olej; ma jednak ograniczonÄ, choÄ stosunkowo dobrÄ odpornoÅÄ na UV . przy dÅugotrwaÅej silnej ekspozycji zalecane dodatkowe zabezpieczenie lub regularne przeglÄdy.

Can Thermoplastic hose with double aramid braid OL8 MARINE handle continuous operation with fuels and hydraulic oils at -40Â°C to +100Â°C?

Yes. Thermoplastic hose with double aramid braid OL8 MARINE is designed for fuels and hydraulic oils and its specified operating temperature range is â40Â°C to +100Â°C, so it can handle continuous operation within those limits. Its polyester inner layer and double aramid braid reinforcement provide chemical compatibility and high strength; the micro-perforated polyurethane outer layer offers resistance in humid and saline air environments. Ensure working pressure for your chosen diameter (165â350 bar) and verify fluid compatibility for specific additives or atypical fluids, but for standard fuels and hydraulic oils OL8 MARINE is suitable for continuous use across â40Â°C to +100Â°C.

Can Thermoplastic hose with double aramid braid OL8 MARINE be used for pneumatic systems carrying compressed air in high-humidity conditions?

Yes. Thermoplastic hose with double aramid braid OL8 MARINE is suitable for pneumatic systems carrying compressed air in high-humidity conditions. The product description explicitly lists gases and air among compatible media and states suitability for operation in high humidity and saline air environments. Construction and ratings that support this use: - Inner layer: polyester. compatible with air and moisture. - Reinforcement: double aramid braid. provides high strength and burst resistance for compressed-air pressures. - Outer layer: micro-perforated polyurethane. durable, flexible and designed for marine/humid/saline conditions. - Standards: SAE 100R8, ISO 3949-R8. appropriate for hydraulic and pneumatic applications. - Working pressure: 165â350 bar depending on diameter. well above typical compressed-air system pressures. - Operating temperature: -40Â°C to +100Â°C (for water and air up to +70Â°C). suitable for most ambient and humid conditions; ensure air temperature stays â¤ +70Â°C. Recommendations: - Verify hose diameter/part number to confirm the exact working pressure meets your systemâs maximum supply pressure. - Use proper fittings compatible with OL8 MARINE and rated for your system pressure. - For continuous operation near +70Â°C or in aggressive chemical atmospheres, validate compatibility with your specific application.

Thermoplastic hose with double aramid braid OL8 MARINE

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check
Standard length [m]	15

Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-OL8MARINE-05	OL8 MARINE thermoplastic hose 3/16"	5	350	In stock	Enquiry
ZC-OL8MARINE-06	OL8 MARINE thermoplastic hose 1/4"	6	350	In stock	Enquiry
ZC-OL8MARINE-08	OL8 MARINE thermoplastic hose 5/16"	8	325	In stock	Enquiry
ZC-OL8MARINE-10	OL8 MARINE thermoplastic hose 3/8"	10	280	In stock	Enquiry
ZC-OL8MARINE-13	OL8 MARINE thermoplastic hose 1/2"	12	245	In stock	Enquiry
ZC-OL8MARINE-16	OL8 MARINE thermoplastic hose 5/8"	16	195	In stock	Enquiry
ZC-OL8MARINE-19	OL8 MARINE thermoplastic hose 3/4"	20	165	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).