Is the Temoplastic double hose with polyester braid F2200 suitable for use with hydraulic oil at temperatures down to -40Â°C and up to +93Â°C?

Yes. The Temoplastic double hose with polyester braid F2200 is specified for hydraulic oil and lists an operating temperature range from â40Â°C to +93Â°C, so it is suitable for use with hydraulic oil across that temperature span. (Note: for water and air the upper limit is +65Â°C, but for hydraulic oil the stated â40Â°C to +93Â°C range applies.)

Can Temoplastic double hose with polyester braid F2200 be used for transporting fuels and gases at pressures up to 215 bar?

Yes. Temoplastic double hose with polyester braid F2200 is specified for hydraulic oil installations, gases, air, fuels and water-based fluids, with working pressures from 157 bar to 215 bar depending on diameter. Its construction (double hose with welded outer layer, polyester braid reinforcement) and standards compliance (DIN 24951, SAE 100R7, ISO 3949-R7) indicate suitability for transporting fuels and gases up to the stated maximum working pressure of 215 bar, within the operating temperature range (â40Â°C to +93Â°C; for water and air up to +65Â°C). Ensure you select the correct hose diameter rated for 215 bar and verify compatibility with the specific fuel or gas and installation conditions before use.

Can Temoplastic double hose with polyester braid F2200 be used with water-based fluids at temperatures up to +65Â°C?

Yes. Temoplastic double hose with polyester braid F2200 is specified for water-based fluids and its operating temperature range includes up to +65Â°C for water and air. The product description lists an overall operating temperature from -40Â°C to +93Â°C, with a specific note that for water and air the maximum recommended temperature is +65Â°C. Therefore it can be used with water-based fluids at temperatures up to +65Â°C, within the stated working pressure limits (157â215 bar depending on hose diameter) and applicable standards (DIN 24951, SAE 100R7, ISO 3949-R7).

Temoplastic double hose with polyester braid F2200

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-F2200C-06	F2200C thermoplastic hose 2x1/4"	6	215	In stock	Enquiry
MC-F2200D-08	Thermoplastic hose F2200D 2x5/16"	8	195	In stock	Enquiry
MC-F2200E-10	Thermoplastic hose F2200E 2x3/8"	10	187	In stock	Enquiry
MC-F2200F-13	Thermoplastic hose F2200F 2x1/2"	12	157	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).