Is VE7M double braided polyester thermoplastic hose compatible with isocyanates and polyols at operating temperatures up to +100Â°C?

Yes. VE7M double braided polyester thermoplastic hose is compatible with isocyanates and polyols at operating temperatures up to +100Â°C. The product description specifically lists isocyanates and polyols among intended media and gives an overall operating temperature range of â40Â°C to +100Â°C. Note the caveat that for water and air the recommended upper limit is +70Â°C, but that restriction does not negate the stated +100Â°C capability for the listed chemicals. Ensure correct installation using fittings type Z and verify compatibility with your specific fluid formulation and pressure/temperature cycling in application.

Can VE7M double braided polyester thermoplastic hose be used with paints and solvents across the full -40Â°C to +100Â°C temperature range?

VE7M double braided polyester thermoplastic hose is intended for paints and solvents and has an overall operating temperature range of -40Â°C to +100Â°C. However, note the manufacturer specifies a reduced maximum temperature for certain media: for water and air the limit is +70Â°C. For paints and solvents the hose construction (polyamide inner layer, double polyester braid, polyurethane outer) supports use across -40Â°C to +100Â°C, but always verify compatibility of specific solvents/paints with polyamide and polyurethane and follow fitting (type Z) and standard (SAE 100R18, ISO 3949-R18) recommendations before service.

Is VE7M double braided polyester thermoplastic hose suitable for conveying gases and air at pressures common in pneumatic systems?

Yes. VE7M double braided polyester thermoplastic hose is suitable for conveying gases and air at pressures common in pneumatic systems, with some important considerations: - Intended media: The hose description explicitly lists gases and air among suitable media. - Construction and standards: Its polyamide inner layer, double polyester braid reinforcement and polyurethane outer cover, plus compliance with SAE 100R18 / ISO 3949-R18, indicate it is designed for flexible, medium-pressure applications typical for pneumatic use. - Temperature limits: Operating range is -40Â°C to +100Â°C overall, but note the specific caveat: for water and air the upper limit is +70Â°C. Ensure your applicationâs air temperature does not exceed +70Â°C. - Fittings and installation: Use fittings type Z as specified to maintain safe, rated connections for pneumatic pressures. - Pressure rating: The exact maximum working pressure isnât given in your excerpt. Double polyester braiding typically supports pneumatic system pressures (e.g., industrial compressed air), but confirm the hoseâs published working pressure and safety factor from the manufacturer to match your system pressure (including surge/impulse). - Compatibility checks: Verify chemical compatibility if air contains contaminants, oils, or additives, and ensure ambient conditions (abrasion, UV, routing) suit the polyurethane cover. Summary: Functionally appropriate for gases and air in pneumatic systems if used within the stated temperature limit for air (+70Â°C), fitted with type Z fittings, and confirmed to have the required working pressure rating for your specific system.

Thermoplastic hose with a double polyester braid VE7M

All products, Thermoplastic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-VE7M-05	Hose thermoplastic VE7M 3/16"	5	250	In stock	Enquiry
ZC-VE7M-06	Hose thermoplastic VE7M 1/4"	6	250	In stock	Enquiry
ZC-VE7M-08	Hose thermoplastic VE7M 5/16"	8	250	In stock	Enquiry
ZC-VE7M-10	Hose thermoplastic VE7M 3/8"	10	250	In stock	Enquiry
ZC-VE7M-13	Hose thermoplastic VE7M 1/2"	12	210	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).