Is MT2 double braided steel thermoplastic hose suitable for handling isocyanates and polyols at temperatures up to +100Â°C?

Yes. MT2 double braided steel thermoplastic hose is suitable for handling isocyanates and polyols at temperatures up to +100Â°C. The hose is specifically designed for solvents, paints, isocyanates, polyols and water-based fluids; it features a polyamide inner layer, double steel braid reinforcement and a polyurethane outer layer. Its stated operating temperature range is -40Â°C to +100Â°C, which covers the requested maximum. Note: for water and air the maximum listed is +70Â°C, but for isocyanates and polyols the +100Â°C rating applies. Ensure compatibility with specific chemicals, pressures and durations in your application and verify fittings and any regulatory or safety requirements before use.

Can MT2 double braided steel thermoplastic hose be used for solvent and water-based fluid transfer at -40Â°C to +100Â°C?

Yes. MT2 double braided steel thermoplastic hose is suitable for transferring solvents and water-based fluids within the stated temperature range. Its polyamide inner layer and polyurethane outer cover make it compatible with solvents, paints, isocyanates, polyols and water-based fluids. The hoseâs operating temperature is -40Â°C to +100Â°C; note that for water and air the recommended maximum is +70Â°C. Micro-perforation is available on request for gases and air. Always verify chemical compatibility and pressure requirements for your specific fluids and application.

Does MT2 double braided steel thermoplastic hose support micro-perforation for gas and air applications?

Yes. MT2 double braided steel thermoplastic hose can be supplied with micro-perforation on request specifically for gas and air applications. The hose features a polyamide inner layer, double steel braid reinforcement, and a polyurethane outer layer. Operating temperature range is â40Â°C to +100Â°C (for water and air up to +70Â°C), and micro-perforation is available as an option to meet gas and air requirements.

Thermoplastic hose with a double steel braid MT2

All products, Thermoplastic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check
Standard length [m]	30

Light, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-MT2-06	Hose thermoplastic MT2 1/4"	6	400	In stock	Enquiry
ZC-MT2-08	Hose thermoplastic MT2 5/16"	8	350	In stock	Enquiry
ZC-MT2-10	Hose thermoplastic MT2 3/8"	10	330	In stock	Enquiry
ZC-MT2-13	Hose thermoplastic MT2 1/2"	12	275	In stock	Enquiry
ZC-MT2-16	Hose thermoplastic MT2 5/8"	16	250	In stock	Enquiry
ZC-MT2-19	Hose thermoplastic MT2 3/4"	20	215	In stock	Enquiry
ZC-MT2-25	Hose thermoplastic MT2 1"	25	165	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).