Is the MTKH thermoplastic hose with aramid and steel braid suitable for hydraulic oil, fuels, and water-based fluids across the stated -40Â°C to +100Â°C range?

Yes. The MTKH thermoplastic hose with aramid and steel braid is specified for hydraulic oil, fuels and water-based fluids and its stated operating temperature range is â40Â°C to +100Â°C. Note one manufacturer caveat: for water and air the maximum recommended temperature is +70Â°C. Also ensure you select the correct hose diameter/variant to meet the required working pressure (200â425 bar depending on diameter) and consult TUBES INTERNATIONALÂ® installation guidance and any application-specific compatibility charts before final selection.

Can the MTKH thermoplastic hose with aramid and steel braid be supplied in a micro-perforated version for gases and air?

Yes. The MTKH thermoplastic hose with aramid and steel braid Format can be supplied in a micro-perforated version for gases and air on request. It is a lightweight, flexible hose designed for hydraulic oil, fuels and water-based fluids; inner layer polyester, aramid + steel braid reinforcement, polyurethane outer layer. Working pressure ranges from 200 to 425 bar depending on diameter. Operating temperature -40Â°C to +100Â°C (for water and air up to +70Â°C). For installation and ordering, contact TUBES INTERNATIONALÂ®.

Does the MTKH thermoplastic hose with aramid and steel braid maintain required working pressures from 200â425 bar across all diameters?

No. the MTKH thermoplastic hose with aramid and steel braid does not maintain a single fixed working pressure across all diameters. The specification states working pressure ranges from 200 bar to 425 bar depending on hose diameter, so smaller or larger diameters will have different rated working pressures within that range. To confirm the exact working pressure for a specific diameter, consult TUBES INTERNATIONALÂ® or the product datasheet.

MTKH thermoplastic hose with aramid and steel braid

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check
Reinforcement	aramid braid, steel braid

Lightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar – depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-MTKH-10	MTKH thermoplastic hose 3/8"	10	425	In stock	Enquiry
ZC-MTKH-13	MTKH thermoplastic hose 1/2"	12	375	In stock	Enquiry
ZC-MTKH-19	MTKH thermoplastic hose 3/4"	20	225	In stock	Enquiry
ZC-MTKH-25	MTKH 1 thermoplastic hose	25	200	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar – depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check
Reinforcement	aramid braid, steel braid