Is the Thermoplastic hose with polyester braid S0090 suitable for use with isocyanates at temperatures up to +93Â°C?

Yes. Thermoplastic hose with polyester braid S0090 is suitable for use with isocyanates up to +93Â°C. The hose description explicitly lists isocyanates among compatible media and specifies an overall operating temperature range of -40Â°C to +93Â°C. Note one caveat: for water and air the maximum recommended temperature is lower (+65Â°C), but for isocyanates the stated upper limit of +93Â°C applies.

Can Thermoplastic hose with polyester braid S0090 be used safely with solvents and paints at temperatures down to -40Â°C?

Yes. Thermoplastic hose with polyester braid S0090 can be used safely with solvents and paints at temperatures down to -40Â°C. It is specifically described as a lightweight, flexible hose for solvents, paints, isocyanates, polyols, gases, air and water-based fluids. Its construction-polyamide inner layer, polyester braid reinforcement and microperforated polyurethane outer layer-supports operation across a temperature range from -40Â°C to +93Â°C (note: for water and air the upper limit is +65Â°C). Ensure compatibility with specific chemicals and pressures for your application, but the stated temperature range covers -40Â°C.

Can Thermoplastic hose with polyester braid S0090 handle polyols and gases in temperatures between -40Â°C and +93Â°C?

Yes. Thermoplastic hose with polyester braid S0090 is designed for solvents, paints, isocyanates, polyols, gases, air and water-based fluids, with an inner polyamide layer, polyester braid reinforcement and a microperforated polyurethane outer layer. Its rated operating temperature range is â40Â°C to +93Â°C (note: for water and air the upper limit is +65Â°C). Therefore S0090 can handle polyols and gases across â40Â°C to +93Â°C, provided the specific gas or polyol and the application do not impose additional chemical compatibility, pressure, safety or regulatory limits beyond the stated temperature range. For water and air service the maximum temperature is +65Â°C. If you need confirmation for a particular polyol, gas type, pressure, cyclic conditions or regulatory requirement, provide those details for a precise compatibility check.

Thermoplastic hose with polyester braid S0090

All products, Thermoplastic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-S0090B-05	Thermoplastic hose S0090B 3/16"	5	130	In stock	Enquiry
MC-S0090C-06	Thermoplastic hose S0090C 1/4"	6	130	In stock	Enquiry
MC-S0090D-08	Thermoplastic hose S0090D 5/16"	8	120	In stock	Enquiry
MC-S0090E-10	Thermoplastic hose S0090E 3/8"	10	120	In stock	Enquiry
MC-S0090F-13	Thermoplastic hose S0090F 1/2"	12	110	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).