Is the MTBH1 steel braided double thermoplastic hose available in a micro-perforated version for gas and air applications?

Yes. The MTBH1 steel braided double thermoplastic hose is available on request in a microâperforated version suitable for gas and air applications. Its construction.polyester inner layer, steel braid reinforcement and polyurethane outer layer.supports use with gases and air (operating temperature for water and air up to +70Â°C). Working pressure ranges from 190 to 325 bar depending on diameter.

Can the MTBH1 steel braided double thermoplastic hose handle hydraulic oils at +100Â°C continuously?

Yes. The MTBH1 steel braided double thermoplastic hose is rated for an operating temperature up to +100Â°C and is specifically designed for hydraulic oil installations, so it can handle hydraulic oils continuously at +100Â°C. Ensure the specific hose diameter and working pressure (190â325 bar) match your system and confirm fluid compatibility with polyester inner layer and polyurethane outer layer for long-term service.

Does the MTBH1 steel braided double thermoplastic hose support fuel transfer applications?

Yes. the MTBH1 steel braided double thermoplastic hose supports fuel transfer applications. The product description explicitly lists âfuelsâ among its intended media. Key relevant specs: - Construction: dual inner polyester layers with steel braid reinforcement and a polyurethane outer layer (double version = two hoses with a welded outer layer), suitable for robust handling. - Working pressure: 190â325 bar depending on diameter. ample for many fuel transfer systems (verify system pressure class). - Temperature range: â40Â°C to +100Â°C (note: for water and air up to +70Â°C). suitable for typical fuel temperatures but confirm compatibility with any high-temperature fuel conditions. - Available on request in microâperforated form for gases/air (not required for liquid fuel). Precautions: confirm chemical compatibility of polyester and polyurethane with the specific fuel type (e.g., ethanol blends, biodiesel) and verify pressure/temperature requirements, fittings, and regulatory approvals for your fuel-transfer application.

MTBH1 steel braided double thermoplastic hose

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, fuels, and water-based fluids. Available on request in micro-perforated form (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-MTBH1-05	MTBH1 thermoplastic hose 2x3/16"	5	325	In stock	Enquiry
ZC-MTBH1-06	MTBH1 thermoplastic hose 2x1/4"	6	300	In stock	Enquiry
ZC-MTBH1-08	MTBH1 thermoplastic hose 2x5/16"	8	240	In stock	Enquiry
ZC-MTBH1-10	Thermoplastic hose MTBH1 2x3/8"	10	225	In stock	Enquiry
ZC-MTBH1-13	MTBH1 thermoplastic hose 2x1/2"	12	190	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, fuels, and water-based fluids. Available on request in micro-perforated form (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).