Is Thread sealer AN30-542, pen suitable for disassembly after curing in hydraulic and pneumatic systems?

Yes. Thread sealer AN30-542, pen is suitable for assemblies that may need disassembly after curing in hydraulic and pneumatic systems. It is a medium-viscosity, medium-strength anaerobic sealant formulated for sealing such systems while allowing later removal of fittings. Key properties: maximum gap fill 0.15 mm, operating temperature range â60Â°C to +150Â°C, brown color, available in 20 ml and 50 ml pen formats.

Can Thread sealer AN30-542, pen be used on mixed-metal fittings in hydraulic and pneumatic systems?

Yes. Thread sealer AN30-542, pen is suitable for mixed-metal fittings in hydraulic and pneumatic systems. As an anaerobic thread sealant with medium viscosity and medium strength, it seals metal-to-metal threaded joints, allows possible disassembly, and fills gaps up to 0.15 mm. Its operating temperature range (-60Â°C to +150Â°C) covers typical hydraulic and pneumatic applications. Use according to surface preparation and application instructions for best results.

Can Thread sealer AN30-542, pen be applied to fittings with a gap larger than 0.15 mm?

Thread sealer AN30-542, pen is specified for use on fittings with a maximum gap of 0.15 mm. Applying it to joints with gaps larger than 0.15 mm is not recommended because the productâs sealing performance and mechanical strength are formulated for clearances up to that limit. Using it on larger gaps can lead to incomplete cure, leakage, reduced strength and potential failure of the seal. For gaps exceeding 0.15 mm, choose a sealant or gasket solution designed for larger clearances or consult the manufacturer for an alternative product.

Sealant for threads AN30-542, pen

All products, Seals and thread sealants/

Additional information

An anaerobic thread sealant. Sealing of hydraulic and pneumatic systems. medium viscosity, medium strength – disassembly possible. Gap maximum 0.15 mm. color: brown. Operating temperature: od -60°C up to +150°C. Packaging of the “pen” type with a capacity of: 20 and 50 ml.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
WE-AN30-542-P-020	Sealant AN30542 - pen 20 ml	-	-	In stock	0 zł		Enquiry
WE-AN30-542-P-050	Sealant AN30542 - pen 50 ml	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

An anaerobic thread sealant. Sealing of hydraulic and pneumatic systems. medium viscosity, medium strength – disassembly possible. Gap maximum 0.15 mm. color: brown. Operating temperature: od -60°C up to +150°C. Packaging of the “pen” type with a capacity of: 20 and 50 ml.