Is the TR-L reducing tee fitting, carbon steel, zinc-nickel, compliant with DIN 2353 and rated with a 4:1 safety factor?

Yes. The TR-L reducing tee fitting, carbon steel, zinc-nickel matches the DIN 2353 description (24Â° DIN 2353 socket with external metric thread), is available as type L (light series), uses carbon steel with zinc-nickel coating (6â10 Âµm, up to 720 hours salt spray resistance), and is rated with a 4:1 safety factor.

Does the TR-L reducing tee fitting, carbon steel, zinc-nickel, feature zinc-nickel coating with 6â10 Âµm thickness and 720 h salt spray resistance?

Yes. The TR-L reducing tee fitting, carbon steel, zinc-nickel features a zinc-nickel coating with a layer thickness of 6â10 Âµm and offers very high corrosion resistance-up to 720 hours without corrosion in a salt spray chamber.

Can the TR-L reducing tee fitting, carbon steel, zinc-nickel, be used in hydraulic systems requiring a 4:1 safety factor?

Yes. The TR-L reducing tee fitting, carbon steel, zinc-nickel (24Â° DIN 2353 socket with external metric thread, light series) is specified with a safety factor of 4:1 and therefore is suitable for use in hydraulic systems that require a 4:1 safety factor, provided that: - The operating pressure of your system does not exceed the maximum working pressure rating for the specific size and configuration of the TR-L fitting (consult the manufacturerâs pressure ratings for the exact part number). - Installation follows DIN 2353 assembly guidelines (correct torque, thread engagement, sealing methods) and the fitting is not subjected to loads or conditions outside its intended use (e.g., undue bending, vibration, misalignment). - Compatibility checks (fluid type, temperature range, and corrosion environment) confirm the carbon steel with zinc-nickel coating is acceptable; note the coating provides high corrosion resistance (6â10 Âµm, up to ~720 hours in salt spray) but is not a substitute for material selection where chemical compatibility or extreme environments are a concern. If those conditions are met, the TR-L reducing tee fitting, carbon steel, zinc-nickel can be used in systems requiring a 4:1 safety factor.

TR-L reducing tee fitting, carbon steel, zinc-nickel

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10, 15, 25, 30, 40

DIN 2353 reducing tee fitting, type TL-L: 24° DIN 2353 socket with external metric thread. Safety factor 4:1. Available as: L (light series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-TR-06-08-06L-CN	Reducer fitting DIN 2353 TR 6/8/6L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-06-10-06L-CN	Reduction fitting DIN 2353 TR 6/10/6L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-08-06-08L-CN	Reducer fitting DIN 2353 TR 8/6/8L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-08-10-08L-CN	Reduction fitting DIN 2353 TR 8/10/8L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-08-12-08L-CN	Reduction fitting DIN 2353 TR 8/12/8L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-10-06-10L-CN	Reduction fitting DIN 2353 TR 10/6/10L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-10-08-10L-CN	Reduction fitting DIN 2353 TR 10/8/10L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-10-10-06L-CN	Reduction fitting DIN 2353 TR 10/10/6L, Zn-Ni	-	500	In stock	Enquiry
HD-TR-10-12-10L-CN	Reduction fitting DIN 2353 TR 10/12/10L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-10-12-12L-CN	Reducer fitting DIN 2353 TR 10/12/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-10-15-10L-CN	Reduction fitting DIN 2353 TR 10/15/10L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-10-18-18L-CN	Reduction fitting DIN 2353 TR 10/18/18L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-06-12L-CN	Reduction fitting DIN 2353 TR 12/6/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-08-08L-CN	Reduction fitting DIN 2353 TR 12/8/8L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-08-12L-CN	Reduction fitting DIN 2353 TR 12/8/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-10-10L-CN	Reduction fitting DIN 2353 TR 12/10/10L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-10-12L-CN	Reduction fitting DIN 2353 TR 12/10/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-15-12L-CN	Reduction fitting DIN 2353 TR 12/15/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-15-15L-CN	Reduction fitting DIN 2353 TR 12/15/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-12-18-12L-CN	Reduction fitting DIN 2353 TR 12/18/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-06-15L-CN	Reduction fitting DIN 2353 TR 15/6/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-08-15L-CN	Reduction fitting DIN 2353 TR 15/8/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-10-10L-CN	Reduction fitting DIN 2353 TR 15/10/10L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-10-15L-CN	Reduction fitting DIN 2353 TR 15/10/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-12-12L-CN	Reduction fitting DIN 2353 TR 15/12/12L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-12-15L-CN	Reduction fitting DIN 2353 TR 15/12/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-18-15L-CN	Reduction fitting DIN 2353 TR 15/18/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-18-18L-CN	Reduction fitting DIN 2353 TR 15/18/18L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-15-22-15L-CN	Reduction fitting DIN 2353 TR 15/22/15L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-18-08-18L-CN	Reduction fitting DIN 2353 TR 18/8/18L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-18-10-10L-CN	Reduction fitting DIN 2353 TR 18/10/10L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-18-10-18L-CN	Reduction fitting DIN 2353 TR 18/10/18L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-18-12-18L-CN	Reduction fitting DIN 2353 TR 18/12/18L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-18-15-15L-CN	Reduction fitting DIN 2353 TR 18/15/15L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-18-15-18L-CN	Reduction fitting DIN 2353 TR 18/15/18L, Zn-Ni	-	400	In stock	Enquiry
HD-TR-18-22-18L-CN	Reduction fitting DIN 2353 TR 18/22/18L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-18-22-22L-CN	Reduction fitting DIN 2353 TR 18/22/22L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-22-10-22L-CN	Reduction fitting DIN 2353 TR 22/10/22L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-22-12-22L-CN	Reducer fitting DIN 2353 TR 22/12/22L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-22-15-15L-CN	Reduction fitting DIN 2353 TR 22/15/15L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-22-15-22L-CN	Reduction fitting DIN 2353 TR 22/15/22L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-22-18-18L-CN	Reduction fitting DIN 2353 TR 22/18/18L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-22-18-22L-CN	Reduction fitting DIN 2353 TR 22/18/22L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-28-10-28L-CN	Reduction fitting DIN 2353 TR 28/10/28L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-28-12-28L-CN	Reducer fitting DIN 2353 TR 28/12/28L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-28-15-28L-CN	Reduction fitting DIN 2353 TR 28/15/28L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-28-18-28L-CN	Reduction fitting DIN 2353 TR 28/18/28L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-28-22-22L-CN	Reduction fitting DIN 2353 TR 28/22/22L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-28-22-28L-CN	Reduction fitting DIN 2353 TR 28/22/28L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-35-18-35L-CN	Reduction fitting DIN 2353 TR 35/18/35L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-35-28-35L-CN	Reduction fitting DIN 2353 TR 35/28/35L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-42-18-42L-CN	Reduction fitting DIN 2353 TR 42/18/42L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-42-22-42L-CN	Reduction fitting DIN 2353 TR 42/22/42L, Zn-Ni	-	250	In stock	Enquiry
HD-TR-42-28-42L-CN	Reduction fitting DIN 2353 TR 42/28/42L, Zn-Ni	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DIN 2353 reducing tee fitting, type TL-L: 24° DIN 2353 socket with external metric thread. Safety factor 4:1. Available as: L (light series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.