Is the Universal hose for air, water and light chemicals CODAN 3320 safe to use with epoxy or polyurethane paints and resistant to acetates and ketones?

Yes. The Universal hose for air, water and light chemicals CODAN 3320 is safe to use with epoxy and polyurethane paints of the dispersive waterâbased type and is resistant to acetates and ketones. It is not suitable for oils, fuels, aromatic hydrocarbons, cellulose paints, chlorinated rubber or other media containing aromatic solvents (e.g., toluene, xylene) or gasoline. For chemical applications beyond typical light chemicals, contact Tubes International.

Can Universal hose for air, water and light chemicals CODAN 3320 be used on hose reels without losing performance?

Yes. Universal hose for air, water and light chemicals CODAN 3320 can be used on hose reels without losing performance. Its strong construction, textile braid reinforcement (PVA) and low elongation under pressure make it suitable for reel use. The hoseâs working pressure (20 bar), wide temperature range (-40Â°C to +95Â°C), electrically conductive inner EPDM layer (R < 10^6 Î©) and ozone/weatherâresistant outer EPDM layer support reliable operation on reels. Ensure application fluids are within its compatibility list (air, cold/hot water, light chemicals; not suitable for oils, fuels, aromatic hydrocarbons, cellulose paints, chlorinated rubber or solvents like toluene/xylene). For specific chemical uses, consult Tubes International.

Can Universal hose for air, water and light chemicals CODAN 3320 safely handle hot water up to 95Â°C and maintain 20 bar working pressure?

Yes. Universal hose for air, water and light chemicals CODAN 3320 is specified for a working pressure of 20 bar and an operating temperature range up to +95Â°C. Its constructionâblack EPDM inner and outer layers with PVA textile braid reinforcementâsupports use with hot water (up to 95Â°C). The inner layer is electrically conductive (R < 10^6 Î©, EN ISO 8031), and the outer layer is ozone- and weather-resistant. Caveats: avoid acids and prohibited media listed (oils, fuels, aromatic hydrocarbons, cellulose paints, chlorinated rubber, solvents like toluene/xylene, gasoline). For chemical applications beyond the stated âlight chemicalsâ or if exposure to borderline media is possible, consult Tubes International.

A universal hose for air, water and light chemicals CODAN 3320

All products, General purpose hoses/

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	95
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	50
Reinforcement	textile braid

A universal flexible rubber hose delivery, intended for air, cold and hot water and light chemicals (with the exception acids). resistant to acetates and ketones. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. hose o strong the structure and small elongation pod pressure. is suitable for use on drums. Layer inner electrically conductive (R 6 Ω, EN ISO 8031), Layer outer resistant to ozone and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA – alcohol polyvinyl). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CO-3320-06	Hose CODAN 3320 6 mm	6	20	In stock	Enquiry
CO-3320-08	Hose CODAN 3320 8 mm	8	20	In stock	Enquiry
CO-3320-10	Hose CODAN 3320 10 mm	10	20	In stock	Enquiry
CO-3320-13	Hose CODAN 3320 13 mm	12	20	In stock	Enquiry
CO-3320-16	Hose CODAN 3320 16 mm	16	20	In stock	Enquiry
CO-3320-19	Hose CODAN 3320 19 mm	20	20	In stock	Enquiry
CO-3320-25	Hose CODAN 3320 25 mm	25	20	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A universal flexible rubber hose delivery, intended for air, cold and hot water and light chemicals (with the exception acids). resistant to acetates and ketones. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. hose o strong the structure and small elongation pod pressure. is suitable for use on drums. Layer inner electrically conductive (R 6 Ω, EN ISO 8031), Layer outer resistant to ozone and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA – alcohol polyvinyl). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	95
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	50
Reinforcement	textile braid