Is the SFB wall mounting bracket compatible with both BIT system 1/8" and 1/4" components, and what screws are required for installation?

Yes. The SFB wall mounting bracket is designed for the BIT system and is compatible with both 1/8" and 1/4" components. For installation you will need screws appropriate for mounting the bracket to the wall (type and length depend on your wall material.e.g. wood screws for timber, masonry anchors with screws for concrete/brick, or drywall anchors with screws for plasterboard) and the screws specified for fixing BIT components to the bracket (use the screws supplied with the BIT components or the manufacturer-recommended small machine/wood screws matching the BIT mounting holes). Ensure screw length and anchor type fully engage the wall substrate and clearances for the BIT system 1/8" or 1/4" fittings.

Can the SFB wall mounting bracket securely hold BIT system 1/8" and 1/4" modules on uneven surfaces, and which fasteners are recommended?

Yes. The SFB wall mounting bracket is designed for the BIT system 1/8" and 1/4" modules and can securely hold them on uneven surfaces when installed correctly. For best results, use appropriate anchors that match the wall substrate and the module weight: heavy-duty masonry anchors (e.g., sleeve or wedge anchors) for concrete/brick, and long toggle or spring-toggle anchors for hollow drywall. Use corrosion-resistant screws or bolts sized to the bracketâs mounting holes (typically #8â#14 screws or M4âM6 bolts depending on hole diameter) and ensure fasteners engage solid backing or anchors fully. If mounting to studs or timber, use wood screws or lag bolts of sufficient length and shear strength. Pre-level the bracket during installation and use shims where needed to compensate for unevenness.

Does the SFB wall mounting bracket require different mounting holes or adapters for BIT system 1/8" vs 1/4" modules?

The SFB wall mounting bracket is designed to accommodate both BIT system 1/8" and 1/4" modules without requiring different mounting holes or additional adapters. The bracketâs hole pattern and slot positions match the attachment points used by both module formats within the BIT system, so you can mount either 1/8" or 1/4" modules directly to the same SFB wall mounting bracket.