Is the Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black suitable for Zone 0, 1, 2, 20, 21, and 22 hazardous areas?

No. Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black is intended for use in the first and second explosion hazard zones (ATEX) and has TÃ¼V certification, construction from AISI 316 stainless steel, EPDM covers and Viton seals, adjustable nozzle, trigger lock, 1/2" BSP, working pressure 24 bar, max temp +60Â°C and rated flow. That specification supports Zones 1 and 2 (gaseous) and Zones 21 and 22 (dust) only where the equipment is certified for those zones. It is not specified or certified for Zone 0 (continuous presence of explosive atmosphere) and therefore must not be used in Zone 0.

Can the Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black be used with potable water systems?

Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black: Yes - materials and seals specified (AISI 316 stainless steel, EPDM rubber covers, Viton seals) are commonly compatible with potable water. TÃ¼V certification and ATEX rating indicate industrial safety standards; working pressure (up to 24 bar), temperature limit (+60Â°C) and flow rates (30â70 l/min) are suitable for many potable water applications. However, final suitability depends on local drinking-water regulations and certification requirements for potable systems; verify with your water authority or supplier that EPDM/Viton and any manufacturing/cleaning processes meet regional potable-water approvals.

Does the Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black require special maintenance for ATEX compliance?

Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black does not require any special dayâtoâday maintenance solely to preserve ATEX compliance beyond standard good practices for equipment used in explosive atmospheres. Key points to ensure ongoing ATEX conformity: - Routine inspections: check for visible damage, corrosion (despite AISI 316 stainless steel), wear of EPDM covers and Viton seals, and proper operation of the trigger lock and adjustable nozzle. Inspect connections (1/2" BSP) and hose fittings for tightness and leaks. - Functional tests: verify smooth flow regulation, trigger action, and that the adjustable outlet nozzle operates correctly at working pressures up to 24 bar. Confirm flow rates roughly match expected values (30 l/min at 5 bar; 70 l/min at 24 bar) as part of periodic checks. - Seals and elastomers: replace EPDM and Viton parts if hardened, cracked, swollen or degraded. Use only compatible replacement parts to maintain ATEX-rated integrity. - Cleaning: keep the unit clean and free of deposits, combustible residues or conductive contamination that could impair safe operation. Use cleaning agents compatible with AISI 316, EPDM and Viton. - Environmental limits: do not exceed the maximum operating temperature (+60Â°C) or working pressure (24 bar). Ensure use within first and second explosion hazard zone guidelines and the environments defined by the TÃ¼V certificate. - Documentation and certification: retain the TÃ¼V certificate and maintenance/inspection records. Follow any manufacturer instructions and site-specific ATEX procedures. If installed in fixed systems, coordinate with site ATEX responsible persons for periodic statutory inspections. - Repairs and modifications: do not modify or perform repairs other than by authorized personnel using approved parts; unauthorized changes can void ATEX compliance. Following these practices will help maintain the ATEX status of Water gun with trigger guard bail, stainless steel, AKBO HEAVY DUTY, ATEX, black.

Water gun with a trigger guard bow, steel stainless, AKBO HEAVY DUTY, ATEX, black

All products, Low-pressure water spray guns/

Additional information

An AKBO HEAVY DUTY water gun for use in first and the other Zone hazard explosion, (ATEX). has certificate TüV. made of steel stainless AISI 316, cover with rubber EPDM, the gasket made of Viton. has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Connection: 1/2″ BSP female. Working pressure: 24 bar. Maximum Operating temperature: +60°C. Flow rate: 30 l/min (5 bar), 70 l/min (24 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-RNP01-BK-EX	Gun for wody AKBO HEAVY DUTY ATEX, 1/2" BSP female, with a bail, AISI 316, black	-	24	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

An AKBO HEAVY DUTY water gun for use in first and the other Zone hazard explosion, (ATEX). has certificate TüV. made of steel stainless AISI 316, cover with rubber EPDM, the gasket made of Viton. has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Connection: 1/2″ BSP female. Working pressure: 24 bar. Maximum Operating temperature: +60°C. Flow rate: 30 l/min (5 bar), 70 l/min (24 bar).