Does the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel include the screw, washer, or nut for installation?

Does the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel include the screw, washer, or nut for installation? No . the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel does not include a screw, washer, or nut.

Is the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel suitable for marine saltwater exposure?

Yes. The DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel is suitable for marine saltwater exposure. The strip is AISI 304 stainless steel (W4) and the product description explicitly notes the W4 version is recommended for marine industry applications. The EPDM rubber flange offers resistance to water, abrasion, temperature changes and aging, making the clamp appropriate for vibration-damping and abrasion-prone marine environments. Note: the clamp does not include screw, washer or nut-choose appropriate marine-grade fasteners for best corrosion resistance.

Can the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel withstand high engine vibration and shock?

Yes. the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel is designed to withstand high engine vibration and shock in typical applications. Key reasons: - It is compliant with DIN 3016, a standard for safe, vibration-damping installation of pipes and hoses. - The EPDM rubber flange provides effective vibration damping, abrasion protection and resilience to temperature changes and aging. - The AISI 304 (W4) stainless steel strip offers good mechanical strength and corrosion resistance; W4 is specifically suitable for demanding environments including marine use. - Both strip ends have steel-reinforced holes, increasing resistance to compression and mechanical loads under shock and vibration. Notes/limitations: - Performance depends on correct sizing, proper installation (including appropriate screw/washer/nut selection, which are not supplied), and the specific vibration/shock severity and frequency spectrum of the engine. For extreme or specialized high-shock applications, validate against measured vibration profiles or consult the equipment manufacturer for confirmation.

DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, AISI 304 steel

Additional information

Material	SS – stainless steel

RUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose covers), etc., where there is a risk of abrasion and damage. This type of clamp has a wide range of applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for marine industry applications. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 15 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-43004659	RUBBER P-CLIP clamp 5 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004667	RUBBER P-CLIP clamp 6 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004683	RUBBER P-CLIP clamp 8 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004704	RUBBER P-CLIP clamp 10 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004712	RUBBER P-CLIP clamp 11 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004720	RUBBER P-CLIP clamp 12 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004739	RUBBER P-CLIP clamp 13 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004747	RUBBER P-CLIP clamp 14 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004755	RUBBER P-CLIP clamp 15 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004763	RUBBER P-CLIP clamp 16 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004771	RUBBER P-CLIP clamp 17 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004780	RUBBER P-CLIP clamp 18 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004798	RUBBER P-CLIP clamp 19 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004800	RUBBER P-CLIP clamp 20 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004819	RUBBER P-CLIP clamp 21 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004827	RUBBER P-CLIP clamp 22 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004835	RUBBER P-CLIP clamp 23 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004851	RUBBER P-CLIP clamp 25 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004860	RUBBER P-CLIP clamp 26 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004878	RUBBER P-CLIP clamp 27 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004886	RUBBER P-CLIP clamp 28 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004907	RUBBER P-CLIP clamp 30 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004923	RUBBER P-CLIP clamp 32 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004931	RUBBER P-CLIP clamp 33 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004940	RUBBER P-CLIP clamp 34 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004958	RUBBER P-CLIP clamp 35 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004966	RUBBER P-CLIP clamp 36 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004974	RUBBER P-CLIP clamp 37 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43004982	RUBBER P-CLIP clamp 38 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43005002	RUBBER P-CLIP clamp 40 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43005053	RUBBER P-CLIP clamp 45 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43005109	RUBBER P-CLIP clamp 50 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43005141	RUBBER P-CLIP clamp 54 mm, width 15 mm, W4	-	-	In stock	Enquiry
AB-43005205	RUBBER P-CLIP clamp 60 mm, width 15 mm, W4	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

RUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose covers), etc., where there is a risk of abrasion and damage. This type of clamp has a wide range of applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for marine industry applications. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 15 mm.