Can CEL hydraulic end, type ZMZ111 light series (carbon steel) be crimped using standard sleeves for metric-threaded, 60Â° cone sealed Z-type hydraulic tails?

Yes . the CEL hydraulic end, type ZMZ111, light series (carbon steel) can be crimped using a standard crimping sleeve intended for metric-threaded, 60Â° cone sealed Z-type hydraulic tails, provided the sleeve and crimping parameters match the hose assembly requirements. The product description explicitly states it is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose." Key conditions to ensure a proper, leak-free and safe crimp: - Use a sleeve sized and specified for the exact hose type (inner/outer diameter, reinforcement type). - Verify the sleeve is intended for Z-type external metric thread with 60Â° cone (CEL) sealing geometry. - Follow the hose manufacturerâs recommended crimp dimensions, pressure ratings, and tooling (machine settings, die profile). - Confirm material compatibility (carbon steel, galvanized) and that crimping tooling is appropriate for galvanized fittings. - Inspect assembled hose ends for correct insertion depth, sleeve alignment, and absence of damage; perform pressure/test per standards. If any of these conditions are not met, use manufacturer-approved sleeves or consult the hose/fitting supplier for the correct sleeve and crimping specification.

CEL hydraulic end, type ZMZ111, light series, carbon steel

Q: Can CEL hydraulic end, type ZMZ111, light series, carbon steel be crimped with standard sleeves for metric-threaded 60Â° cone Z-type tails?

Yes. CEL hydraulic end, type ZMZ111, light series, carbon steel can be crimped with standard sleeves for metric-threaded 60Â° cone Z-type tails, provided the sleeve is appropriate for the hose type and matches the dimensions of the light-series fitting. The fitting is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose; ensure sleeve inner diameter, length and crimp profile correspond to the hose and the ZMZ111 specifications, and follow manufacturer crimping parameters (press force, die set) to achieve a proper, leak-free assembly.

Q: Is CEL hydraulic end, type ZMZ111, light series, carbon steel compatible with crimping sleeves for metric-threaded 60Â° cone Z-tails?

Yes. CEL hydraulic end, type ZMZ111, light series, carbon steel is compatible with crimping sleeves for metric-threaded 60Â° cone Z-tails. The product description specifies an external metric thread with sealing on a 60Â° cone (CEL) and is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type, so a proper crimping sleeve for metric-threaded 60Â° cone Z-tails is appropriate. Ensure you use a sleeve sized and rated for the specific hose construction and crimping equipment to achieve correct assembly and pressure rating.

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hoses), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMZ111-10-04	End. GZ M10x1, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-12-03	End. GZ M12x1.5, hose 3/16", 24°, light	5	-	In stock	Enquiry
TI-ZMZ111-12-04	End. GZ M12x1.5, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-14-04	End. GZ M14x1.5, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-16-04	End. GZ M16x1.5, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-16-05	End. GZ M16x1.5, hose 5/16", 24°, light	8	-	In stock	Enquiry
TI-ZMZ111-16-06	End. GZ M16x1.5, hose 3/8", 24°, light	10	-	In stock	Enquiry
TI-ZMZ111-18-04	End. GZ M18x1.5, hose 1/4", 24°, light	6	-	In stock	Enquiry
TI-ZMZ111-18-05	End. GZ M18x1.5, hose 5/16", 24°, light	8	-	In stock	Enquiry
TI-ZMZ111-18-06	End. GZ M18x1.5, hose 3/8", 24°, light	10	-	In stock	Enquiry
TI-ZMZ111-22-06	End. GZ M22x1.5, hose 3/8", 24°, light	10	-	In stock	Enquiry
TI-ZMZ111-22-08	End. GZ M22x1.5, hose 1/2", 24°, light	12	-	In stock	Enquiry
TI-ZMZ111-22-10	End. GZ M22x1.5, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-22X16L-08	End. GZ M22x1.5, 16L, hose 1/2", 24°, light	12	-	In stock	Enquiry
TI-ZMZ111-26-08	End. GZ M26x1.5, hose 1/2", 24°, light	12	-	In stock	Enquiry
TI-ZMZ111-26-10	End. GZ M26x1.5, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-27-10	End. GZ M27x2, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-27X1,5-10	End. GZ M27x1.5, hose 5/8", 24/60°, light	16	-	In stock	Enquiry
TI-ZMZ111-30-10	End. GZ M30x2, hose 5/8", 24°, light	16	-	In stock	Enquiry
TI-ZMZ111-30-12	End. GZ M30x2, hose 3/4", 24°, light	20	-	In stock	Enquiry
TI-ZMZ111-30-16	End. GZ M30x2, hose 1", 24°, light	25	-	In stock	Enquiry
TI-ZMZ111-36-16	End. GZ M36x2, hose 1", 24°, light	25	-	In stock	Enquiry
TI-ZMZ111-45-16	End. GZ M45x2, hose 1", 24°, light	25	-	In stock	Enquiry
TI-ZMZ111-45-20	End. GZ M45x2, hose 1.1/4", 24°, light	32	-	In stock	Enquiry
TI-ZMZ111-52-24	End. GZ M52x2, hose 1.1/2", 24°, light	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hoses), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.