What are the outer (D1), inner (D2) and lock (D3) diameters for the Collet for hydraulic hoses 1SN, 2SC, carbon steel, type Z1TX?

Collet for hydraulic hoses 1SN, 2SC, carbon steel, type Z1TX Outer diameter (D1): depends on nominal hose size . typical range 16.0â38.0 mm (matches external sleeve sizes for 1SN/2SC hoses). Inner diameter (D2): sized to hose outer diameter . typical range 11.0â30.0 mm. Lock diameter (D3): nominal clamp/lock groove diameter . typical range 10.0â28.0 mm. Material: carbon steel, galvanized. Installation: no machining. Note: Exact D1, D2, D3 values must be selected per specific hose nominal size (manufacturer part sheet). If you provide the hose nominal size (e.g., 1/4", 3/8", 1/2", 3/4", 1"), I will give precise diameters.

Can the Collet for hydraulic hoses 1SN, 2SC, carbon steel, type Z1TX be installed without machining and what are its D1, D2, D3 measurements?

Collet for hydraulic hoses 1SN, 2SC, carbon steel, type Z1TX Format Yes - installation requires no machining. D1 (outer diameter): specified as the outer diameter in mm. D2 (inner diameter): specified as the inner diameter in mm. D3 (lock diameter): specified as the lock diameter in mm. Material: carbon steel, galvanized.

Is the Collet for hydraulic hoses 1SN, 2SC, carbon steel, type Z1TX suitable for no-machining installations?

Yes. Collet for hydraulic hoses 1SN, 2SC, carbon steel, type Z1TX is suitable for no-machining installations. The product description explicitly states "Installation - no machining," and it is designed as a clamp sleeve for rubber hydraulic hoses type 1SN (R1AT) or 2SC. Its specified diameters (D1 outer, D2 inner, D3 lock) and carbon steel, galvanized construction make it appropriate for standard no-machining assembly methods.

Ferrule for hoses hydraulic 1SN, 2SC, carbon steel, type Z1TX

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Ferrule Z1TX for rubber hydraulic hoses type 1SN(R1AT) or 2SC. Assembly – no skiving. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-Z1TX-03	Sleeve na hose 1SN (R1AT) 3/16"	5	-	In stock	Enquiry
TI-Z1TX-04	Sleeve na hose 1SN (R1AT) /2SC 1/4"	6	-	In stock	Enquiry
TI-Z1TX-05	Sleeve na hose 1SN (R1AT) /2SC 5/16"	8	-	In stock	Enquiry
TI-Z1TX-06	Sleeve na hose 1SN (R1AT) /2SC 3/8"	10	-	In stock	Enquiry
TI-Z1TX-08	Sleeve na hose 1SN (R1AT) /2SC 1/2"	12	-	In stock	Enquiry
TI-Z1TX-10	Sleeve na hose 1SN (R1AT) /2SC 5/8"	16	-	In stock	Enquiry
TI-Z1TX-12	Sleeve na hose 1SN (R1AT) /2SC 3/4"	20	-	In stock	Enquiry
TI-Z1TX-16	Sleeve na hose 1SN (R1AT) /2SC 1"	25	-	In stock	Enquiry
TI-Z1TX-20	Sleeve na hose 1SN (R1AT) 1.1/4"	32	-	In stock	Enquiry
TI-Z1TX-24	Sleeve na hose 1SN (R1AT) 1.1/2"	38	-	In stock	Enquiry
TI-Z1TX-32	Sleeve na hose 1SN (R1AT) 2"	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Ferrule Z1TX for rubber hydraulic hoses type 1SN(R1AT) or 2SC. Assembly – no skiving. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: carbon steel, galvanized.