Does the DKR 45Â° hydraulic end, type ZBW310, carbon steel require a specific crimping sleeve size or standard for proper installation?

The DKR 45Â° hydraulic end, type ZBW310, carbon steel does not mandate a single universal crimping sleeve size or unique standard in its description. It is designed for crimping into hydraulic and industrial hoses using a crimping sleeve suitable for the specific hose type. Therefore the correct sleeve size and profile depend on the hose construction, hose internal diameter, and manufacturer recommendations. Use the hose makerâs specified ferrule/crimp dimensions or the crimping tool and die set matched to that hose and fitting combination. Ensure the sleeve material and crimp profile are compatible with carbon steel fittings and the assembly meets the applicable industry crimping standards (e.g., SAE J516, EN 853/EN 856 guidelines or the hose manufacturerâs instructions) and pressure ratings. If in doubt, consult the hose supplier or the fitting manufacturer for the exact sleeve type and die setting for ZBW310 on your chosen hose.

Is a specific hose preparation or insertion depth required for installing the DKR 45Â° hydraulic end, type ZBW310, carbon steel?

No specific hose preparation or special insertion depth is specified in the provided description for the DKR 45Â° hydraulic end, type ZBW310, carbon steel. It states the fitting is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Therefore follow the hose manufacturerâs and crimp sleeve supplierâs instructions for hose cutting, cleaning, insertion depth and crimp dimensions; use the correct sleeve and crimping die for the hose construction to ensure proper seal and mechanical retention. If in doubt, consult the hose/fitting manufacturer for recommended insertion depth and preparation.

Can DKR 45Â° hydraulic end, type ZBW310, carbon steel be used with non-BSP fittings or adapters?

NoâDKR 45Â° hydraulic end, type ZBW310, carbon steel should not be used with non-BSP fittings or adapters unless the mating part exactly matches the DKR sealing geometry and thread form. The product description specifies an internal BSP thread and nut with a 60Â° sealing cone (DKR). BSP threads (BSPP or BSPT) have specific pitch, diameter and seal methods; the 60Â° DKR cone requires a matching cone seat to achieve a metal-to-metal seal. Using a fitting or adapter of a different standard (e.g., NPT, JIC, Metric, ORFS) will likely result in thread mismatch, improper engagement, leakage, or mechanical failure. If you must adapt to a non-BSP system, use a properly designed adapter that: - Converts BSP to the required standard while preserving the 60Â° cone seating geometry, or - Provides a compatible mating seat and correct thread form and size. Verify adapter specifications, pressure rating, and material compatibility, and perform pressure testing after assembly. When in doubt, consult the hose/end manufacturer or a qualified hydraulic engineer to ensure safe, leak-free connections.

DKR 45° hydraulic end, type ZBW310, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	50

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW310-02-03	End. 45° GW 1/8" BSP, hose 3/16", cone 60°	5	-	In stock	Enquiry
TI-ZBW310-02-04	End fitting 45° GW 1/8" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBW310-04-03	End 45° GW 1/4" BSP, hose 3/16", cone 60°	5	-	In stock	Enquiry
TI-ZBW310-04-04	End. 45° GW 1/4" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBW310-04-05	End 45° GW 1/4" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBW310-04-06	End fitting 45° GW 1/4" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBW310-06-04	End 45° GW 3/8" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBW310-06-05	End 45° GW 3/8" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBW310-06-06	End fitting 45° GW 3/8" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBW310-06-08	End fitting 45° GW 3/8" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBW310-08-05	End. 45° GW 1/2" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBW310-08-06	End fitting 45° GW 1/2" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBW310-08-08	End fitting 45° GW 1/2" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBW310-08-10	End. 45° GW 1/2" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBW310-10-08	End fitting 45° GW 5/8" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBW310-10-10	End fitting 45° GW 5/8" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBW310-12-08	End fitting 45° GW 3/4" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBW310-12-10	End fitting 45° GW 3/4" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBW310-12-12	End fitting 45° GW 3/4" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZBW310-16-12	End. 45° GW 1" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZBW310-16-16	End fitting 45° GW 1" BSP, hose 1", cone 60°	25	-	In stock	Enquiry
TI-ZBW310-20-16	End fitting 45° GW 1.1/4" BSP, hose 1", cone 60°	25	-	In stock	Enquiry
TI-ZBW310-20-20	End fitting 45° GW 1.1/4" BSP, hose 1.1/4", cone 60°	32	-	In stock	Enquiry
TI-ZBW310-24-20	End fitting 45° GW 1.1/2" BSP, hose 1.1/4", cone 60°	32	-	In stock	Enquiry
TI-ZBW310-24-24	End fitting 45° GW 1.1/2" BSP, hose 1.1/2", cone 60°	38	-	In stock	Enquiry
TI-ZBW310-32-24	End fitting 45° GW 2" BSP, hose 1.1/2", cone 60°	38	-	In stock	Enquiry
TI-ZBW310-32-32	End fitting 45° GW 2" BSP, hose 2", cone 60°	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.