Can the Triple plug tee with male thread, type R53 withstand continuous operation at 16 bar and temperatures from -20Â°C to +80Â°C without seal degradation?

Yes. The Triple plug tee with male thread, type R53 is specified for continuous operation at a working pressure of 16 bar and an operating temperature range of â20 Â°C to +80 Â°C. Its sealing material is NBR (nitrile rubber), which is commonly rated for that temperature range and compatible with air and vacuum media. The body is nickel-plated brass, suitable for pneumatic use and repeated assemblies without loss of mechanical or pneumatic sealing per the product description. Caveats: long-term seal life depends on actual duty (pressure cycling, abrasion, exposure to oils/chemicals outside standard compressed air), installation quality, and maintenance. For aggressive media, frequent pressure spikes above 16 bar, or continuous temperatures near the limits, verify with supplier or perform application-specific testing.

Is the Triple plug tee with male thread, type R53 suitable for use with vacuum applications and compressed air?

Yes. The Triple plug tee with male thread, type R53 is suitable for both vacuum applications and compressed air. It is made of nickel-plated brass, uses NBR sealing, supports a working pressure up to 16 bar, and a working temperature range of â20Â°C to +80Â°C; the working media specified include vacuum and air.

Does the Triple plug tee with male thread, type R53 require special maintenance to preserve NBR seals under heavy cycling?

No special or unusual maintenance is required beyond standard best practices to preserve the NBR seals in the Triple plug tee with male thread, type R53 under heavy cycling. NBR (nitrile) seals are suitable for air and vacuum and the specified operating temperature range (â20Â°C to +80Â°C) and working pressure (16 bar) are within normal limits for durable performance. Recommended maintenance practices: - Inspect seals periodically for wear, hardening, cuts or extrusionâfrequency based on cycle rate and service conditions. - Keep sealing surfaces and threads clean of debris, oil contaminants or abrasive particles. - Avoid exposure to fluids or chemicals that degrade NBR (strong acids, ketones, ozone, some oils at elevated temperature). - Ensure correct assembly torque and avoid excessive mechanical stress or misalignment that can accelerate seal wear. - If operating near the temperature or pressure limits, increase inspection frequency and consider replacing seals on a preventive schedule. - For very high cycle rates or aggressive environments, consider testing a sample assembly under service conditions or consulting the seal/material supplier for alternative compounds (e.g., FKM) if needed. Following these routine measures will help maintain sealing performance of the Triple plug tee with male thread, type R53 under heavy cycling.

Triple plug tee with male thread, type R53

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Triple plug tee with external thread, type R53, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L53002	Adjustable triple tee connector RL53 hose 4 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L53008	Triple adjustable tee connector RL53 hose 6 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L53009	Adjustable triple tee connector RL53 hose 6 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L53010	Adjustable triple tee connector RL53 hose 8 mm, GZ BSP 1/8"	-	16	In stock	Enquiry
MW-2L53011	Adjustable triple tee connector RL53 hose 8 mm, GZ BSP 1/4"	-	16	In stock	Enquiry
MW-2L53013	Adjustable triple tee connector RL53 hose 10 mm, GZ BSP 1/4"	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Triple plug tee with external thread, type R53, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.