Is the AGR hydraulic end, type ZBZ110, carbon steel compatible with standard crimping sleeves for crimping hydraulic and industrial hoses?

Yes. The AGR hydraulic end, type ZBZ110, carbon steel is designed for crimping in hydraulic and industrial hoses using a suitable crimping sleeve. Its configuration . a standard hydraulic âtailâ (type Z) and external BSP thread with a 60Â° sealing cone (AGR) . is compatible with conventional crimping processes. Made of carbon steel and galvanized, it is intended to be crimped using a crimping sleeve matched to the hose type, size, and required pressure rating. Ensure you select a sleeve and crimping tool specified for the hose construction (e.g., single-wire, multi-wire, textile) and dimensions to achieve proper mechanical retention and fluid sealing.

Can AGR hydraulic end, type ZBZ110, carbon steel be used with hoses requiring a 60Â° sealing cone and BSP external thread?

Yes. AGR hydraulic end, type ZBZ110, carbon steel is suitable: it features an external BSP thread and a 60Â° sealing cone (AGR) and is designed for crimping into hydraulic and industrial hoses using an appropriate crimping sleeve. Material (carbon steel, galvanized) matches typical hydraulic hose fittings. Ensure the crimping sleeve and hose type are compatible with ZBZ110 dimensions and pressure ratings before assembly.

How do I identify the correct crimping sleeve size for AGR hydraulic end, type ZBZ110, carbon steel?

To identify the correct crimping sleeve size for AGR hydraulic end, type ZBZ110, carbon steel, follow these steps: 1. Check hose specification: determine the hose model, internal diameter (ID), and outside diameter (OD). Crimp sleeves are selected to match the hose OD and specific hose construction. 2. Match sleeve to hose type: AGR hydraulic end, type ZBZ110 is designed for crimping in hydraulic and industrial hoses. Use a crimp sleeve recommended by the hose manufacturer for that hose series and for fittings with a 60Â° sealing cone and external BSP thread. 3. Confirm sleeve material and profile: use a carbon steel, galvanized sleeve or compatible material specified by hose/fitting maker. Ensure sleeve profile fits Z-type fittings (regular hydraulic tail) and accommodates the reinforcement layers of the hose. 4. Refer to dimensions of ZBZ110: obtain the dimensional data for AGR hydraulic end, type ZBZ110 (tail diameter, ferrule seating length, and insertion depth). The correct sleeve length and inner diameter must allow proper insertion of the hose and full engagement of the fitting tail. 5. Use crimper manufacturer chart: consult the crimping-sleeve size chart provided by your crimper or sleeve supplier. Input hose OD and fitting model (ZBZ110) to get the die set and sleeve part number. 6. Verify crimp specifications: check recommended crimp diameter, crimp range, and hexagonal/oval profile (if applicable) for the selected sleeve and hose combination. Ensure crimping force and die geometry match the sleeve and hose. 7. Perform trial assembly and measurement: assemble one sample, crimp per tool settings, then measure final crimp diameter and inspect for correct compression, no hose collapse, and secure retention. Compare to supplier acceptance criteria. If you lack hose ID/OD or manufacturer charts, provide the hose OD and ZBZ110 dimensional data to your sleeve or crimper supplier to get the exact sleeve size recommendation.

AGR hydraulic end, type ZBZ110, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	50

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions	Catalogue
TI-ZBZ110-02-03	End. GZ 1/8" BSP, hose 3/16", cone 60°	5	-	In stock	Enquiry
TI-ZBZ110-02-04	End. GZ 1/8" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBZ110-04-03	End. GZ 1/4" BSP, hose 3/16", cone 60°	5	-	In stock	Enquiry
TI-ZBZ110-04-04	End. GZ 1/4" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBZ110-04-05	End. GZ 1/4" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBZ110-04-06	End. GZ 1/4" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBZ110-06-04	End. GZ 3/8" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBZ110-06-05	End. GZ 3/8" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBZ110-06-06	End. GZ 3/8" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBZ110-06-08	End. GZ 3/8" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBZ110-08-04	End. GZ 1/2" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry	-
TI-ZBZ110-08-05	End. GZ.1/2" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBZ110-08-06	End. GZ 1/2" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBZ110-08-08	End. GZ 1/2" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBZ110-08-10	End. GZ 1/2" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBZ110-08-12	End. GZ 1/2" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry	-
TI-ZBZ110-10-08	End. GZ 5/8" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBZ110-10-10	End. GZ 5/8" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBZ110-10-12	End. GZ 5/8" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZBZ110-12-08	End. GZ 3/4" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBZ110-12-10	End. GZ 3/4" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBZ110-12-12	End. GZ 3/4" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZBZ110-12-16	End. GZ 3/4" BSP, hose 1", cone 60°	25	-	In stock	Enquiry
TI-ZBZ110-16-10	End. GZ 1" BSP, hose 5/8", cone 60°	16	-	In stock	Enquiry
TI-ZBZ110-16-12	End. GZ 1" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZBZ110-16-16	End. GZ 1" BSP, hose 1", cone 60°	25	-	In stock	Enquiry
TI-ZBZ110-16-20	End. GZ 1" BSP, hose 1.1/4", cone 60°	32	-	In stock	Enquiry	-
TI-ZBZ110-20-16	End. GZ 1.1/4" BSP, hose 1", cone 60°	25	-	In stock	Enquiry
TI-ZBZ110-20-20	End. GZ 1.1/4" BSP, hose 1.1/4", cone 60°	32	-	In stock	Enquiry
TI-ZBZ110-20-24	End. GZ 1.1/4" BSP, hose 1.1/2", cone 60°	38	-	In stock	Enquiry
TI-ZBZ110-24-20	End. GZ 1.1/2" BSP, hose 1.1/4", cone 60°	32	-	In stock	Enquiry
TI-ZBZ110-24-24	End. GZ 1.1/2" BSP, hose 1.1/2", cone 60°	38	-	In stock	Enquiry
TI-ZBZ110-32-32	End. GZ 2" BSP, hose 2", cone 60°	50	-	In stock	Enquiry
TI-ZBZ110-40-40	End. GZ 2.1/2" BSP, hose 2.1/2", cone 60°	65	-	In stock	Enquiry
TI-ZBZ110-48-48	End. GZ 3" BSP, hose 3", cone 60°	75	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.