Can BEL 45Â° metric tubular end, type ZMR311, light series, AISI 316L steel be crimped with standard hydraulic crimping sleeves for the specified hose?

Yes. The BEL 45Â° metric tubular end, type ZMR311, light series, AISI 316L steel can be crimped with a standard hydraulic crimping sleeve designed for the specified hose. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type; it uses a metric tube with a cutting ring (BEL) and a regular hydraulic tail (type Z), so standard crimping procedures and sleeves matched to the hose size and construction apply. Ensure you use the correct sleeve profile and die set for the hose specification and follow manufacturer crimping parameters to achieve a proper, leak-free assembly.

Is BEL 45Â° metric tubular end, type ZMR311, light series, AISI 316L steel compatible with crimping machines requiring a cutting-ring (BEL) assembly?

Yes. BEL 45Â° metric tubular end, type ZMR311, light series, AISI 316L steel is compatible with crimping machines requiring a cutting-ring (BEL) assembly. The fitting is a standard hydraulic end with a metric tube and BEL (cutting ring) sealing, designed specifically for crimping in hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type. Material AISI 316L is suitable for typical crimping processes. Ensure the crimping machine and sleeve match the hose and fitting dimensions and pressure ratings before assembly.

Does BEL 45Â° metric tubular end, type ZMR311, light series, AISI 316L steel require a specific crimp sleeve profile?

Yes. The BEL 45Â° metric tubular end, type ZMR311, light series, AISI 316L steel requires a crimping sleeve profile matched to both the hose construction and the fittingâs tubular tail. The description states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type, which means: - Use a sleeve profile specified by the hose manufacturer for that hose material and reinforcement (e.g., textile, single-wire, multi-wire, spiral). - Ensure the sleeve internal diameter and length fit the ZMR311 tubular tail so the cutting ring (BEL) and tube are properly compressed to create the intended seal. - Use crimping dimensions and dies compatible with the light series ZMR311 geometry and the chosen sleeveâfollow hose supplier or fitting maker crimp spec tables. - Because the fitting is AISI 316L, choose a sleeve material and crimping process that ensure corrosion resistance and mechanical compatibility if required. In short: a specific sleeve profile is required. the one recommended for the hose type and compatible with the BEL 45Â° metric tubular end, type ZMR311, light series; follow the hose and fitting manufacturerâs crimp specifications.

BEL 45° metric tubular end, type ZMR311, light series, AISI 316L steel

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	3

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with metric tube, sealing with a cutting ring (BEL), angled 45°, light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-ZMR311-06-03-SS	End 45° tubular 6 mm, hose 3/16", lightweight, AISI 316L	5	-
TI-ZMR311-06-04-SS	End 45° tubular 6 mm, hose 1/4", lightweight, AISI 316L	6	-
TI-ZMR311-08-04-SS	End 45° tubular 8 mm, hose 1/4", lightweight, AISI 316L	6	-
TI-ZMR311-10-05-SS	End 45° tubular 10 mm, hose 5/16", lightweight, AISI 316L	8	-
TI-ZMR311-10-06-SS	End. 45° tubular 10 mm, hose 3/8", lightweight, AISI 316L	10	-
TI-ZMR311-12-06-SS	End 45° tubular 12 mm, hose 3/8", lightweight, AISI 316L	10	-
TI-ZMR311-15-08-SS	End 45° tubular 15 mm, hose 1/2", lightweight, AISI 316L	12	-
TI-ZMR311-18-10-SS	End 45° tubular 18 mm, hose 5/8", lightweight, AISI 316L	16	-
TI-ZMR311-22-12-SS	End 45° tubular 22 mm, hose 3/4", lightweight, AISI 316L	16	-
TI-ZMR311-28-16-SS	End. 45° tubular 28 mm, hose 1", lightweight, AISI 316L	25	-

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with metric tube, sealing with a cutting ring (BEL), angled 45°, light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.