Is the Rubber hose for light chemicals MP 20 safe for use with water-based and glycol-based coolants?

Yes. Rubber hose for light chemicals MP 20 is safe for use with water-based and glycol-based coolants. The hose is specifically designed for air, water, and light chemicals including glycol-based coolants. Its inner black EPDM rubber is compatible with water and glycols, and the hose is rated for temperatures from -40Â°C to +120Â°C (temporarily up to +140Â°C). Ensure working conditions (pressure, temperature, and any additives) stay within the hoseâs specifications and avoid oils, fuels, aromatic hydrocarbons, and other incompatible media.

Can Rubber hose for light chemicals MP 20 be used with acetone and ketone-based paints?

Rubber hose for light chemicals MP 20 Format can be used with acetone and ketone-based paints. The hose is designed for light chemicals including acetone and ketones and is stated suitable for various water-soluble paints and those based on ketones and esters. It is not suitable for cellulose paints, chlorinated rubber, or paints/solvents containing aromatic hydrocarbons (e.g., toluene, xylene) or gasoline, nor for oils and fuels. Ensure application temperatures stay within the hose rating (â40Â°C to +120Â°C, temporarily up to +140Â°C) and confirm compatibility with specific paint formulations if additives or solvents beyond simple ketones are present.

Can Rubber hose for light chemicals MP 20 be safely used with concentrated acids or only with diluted acids?

Rubber hose for light chemicals MP 20 should be used only with diluted acids, not with concentrated acids. Opis wskazuje wyraÅºnie, Å¼e wÄÅ¼e sÄ przeznaczone do lekkich chemikaliÃ³w: non-oxidizing, diluted acids (np. kwas solny i siarkowy) oraz rozcieÅczone zasady i roztwory soli. MateriaÅ (EPDM) i konstrukcja zapewniajÄ odpornoÅÄ na wiele wodnych i ketonowych rozpuszczalnikÃ³w, ale nie sÄ rekomendowane do olejÃ³w, paliw, aromatycznych wÄglowodorÃ³w ani agresywnych, koncentrowanych reagentÃ³w. Dlatego nie stosowaÄ z kwaÅnymi roztworami w stanie stÄÅ¼onym.

Rubber hose for light chemicals MP 20

All products, Chemical hoses/

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100, 20, 50
Reinforcement	textile braid

Pressure hose, very flexible, resistant to aging, ozone, weather conditions, and abrasion. Designed for air, water, and light chemicals: non-oxidizing, diluted acids (e.g., hydrochloric and sulfuric), diluted bases, salt solutions, alcohols, acetone, ketones, glycol-based coolants. Not suitable for oils, fuels, aromatic hydrocarbons. Can be used for various water-soluble paints and those based on ketones and esters. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. Inner and outer layer antistatic R<10⁶ Ω according to EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) spiral textile braid. Outer layer: black EPDM rubber. Operating temperature: from -40°C to +120°C (temporarily up to +140°C).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
SP-MP20-06	Hose MP 20-PAINT SPRAY 6x13 mm	6	20
SP-MP20-08	Hose MP 20-PAINT SPRAY 8x15 mm	8	20
SP-MP20-10	Hose MP 20-PAINT SPRAY 10x17 mm	10	20
SP-MP20-13	Hose MP 20-PAINT SPRAY 13x21 mm	12	20
SP-MP20-16	Hose MP 20-PAINT SPRAY 16x24 mm	16	20
SP-MP20-19	Hose MP 20-PAINT SPRAY 19x28 mm	20	20
SP-MP20-25	Hose MP 20-PAINT SPRAY 25x35 mm	25	20
SP-MP20-32	Hose MP 20-PAINT SPRAY 32x44 mm	32	20
SP-MP20-38	Hose MP 20-PAINT SPRAY 38x50 mm	38	20

Pressure hose, very flexible, resistant to aging, ozone, weather conditions, and abrasion. Designed for air, water, and light chemicals: non-oxidizing, diluted acids (e.g., hydrochloric and sulfuric), diluted bases, salt solutions, alcohols, acetone, ketones, glycol-based coolants. Not suitable for oils, fuels, aromatic hydrocarbons. Can be used for various water-soluble paints and those based on ketones and esters. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. Inner and outer layer antistatic R<10⁶ Ω according to EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) spiral textile braid. Outer layer: black EPDM rubber. Operating temperature: from -40°C to +120°C (temporarily up to +140°C).

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100, 20, 50
Reinforcement	textile braid