Can Quick coupling socket for injection molds with hose end without valve, DYROS series 30 withstand 15 bar working pressure and Viton sealing in cooling liquid and compressed air applications?

Yes. Quick coupling socket for injection molds with hose end without valve, DYROS series 30 is specified for a working pressure of 15 bar and uses Viton sealing. Its brass construction with treated stainless-steel retaining rings, springs, and balls and Viton seals make it suitable for cooling liquids in molds and for compressed air applications. Ensure compatibility with the specific cooling fluid (Viton resists many hydrocarbons, oils and some chemicals but not all aggressive media) and verify system temperature range and any industry-specific certifications before final use.

Quick coupling socket for injection molds with hose end without valve, DYROS series 30

Q: Is the Quick coupling socket for injection molds with hose end without valve, DYROS series 30 compatible with gas cylinder use at 15 bar?

Yes. The Quick coupling socket for injection molds with hose end without valve, DYROS series 30 is compatible with gas cylinder use at 15 bar. The product description specifically lists applications including gas cylinders and specifies a working pressure of 15 bar, with brass components, stainless steel retaining rings/springs/balls, and viton sealing suitable for such use.

Q: Can the Quick coupling socket for injection molds with hose end without valve, DYROS series 30 be used with aggressive cooling fluids?

Yes. the Quick coupling socket for injection molds with hose end without valve, DYROS series 30 can be used with many aggressive cooling fluids, but with precautions. Reasons supporting use: - All main components are made of brass and retaining rings, springs, and balls are made of treated stainless steel, which provide good general corrosion resistance. - Sealing material is Viton (FKM), which is resistant to a wide range of aggressive chemicals, oils and high temperatures. - Rated working pressure is 15 bar, suitable for typical mold cooling circuits. Precautions and limitations: - âAggressive fluidsâ is broad: compatibility depends on the specific chemical (concentration, temperature, exposure time). Brass can be attacked by ammoniacal solutions, strong acids, and some halogenated or sulfur-containing compounds. Certain aggressive fluids may cause dezincification of brass or stress corrosion in specific environments. - Viton is resistant to many fuels, oils, ketones and acids, but it is not compatible with some amines, hot caustics, and certain esters or ethers. - Treated stainless steel improves resistance, but may still be vulnerable in highly chlorinated or acidic environments. Recommendation: - Verify the exact fluid composition, temperature and concentration. - Consult the fluid-viton and brass compatibility charts or contact the fluid supplier. - If uncertainty remains or the fluid is highly aggressive (strong acids/alkalis, high chloride content, ammonia solutions), consider alternative materials (e.g., stainless-steel body, Hastelloy, or EPDM/FFKM seals) or request manufacturer confirmation. Conclusion: The Quick coupling socket for injection molds with hose end without valve, DYROS series 30 is compatible with many aggressive cooling fluids due to brass, treated stainless steel components and Viton seals, but compatibility must be confirmed against the specific fluid and operating conditions before use.

Additional information

Material	B – brass (bronze)

Quick coupling socket DYROS series 30 with hose end without valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-LK314-OV	DN 4 socket with 1/4" hose end, without valve	6	15	In stock	Enquiry
DY-LK315-OV	DN 6 socket with 5/16" hose end, without valve	8	15	In stock	Enquiry
DY-LK316-OV	DN 6 socket with 3/8" hose end, without valve	10	15	In stock	Enquiry
DY-LK318-OV	DN 6 socket with 1/2" hose end, without valve	12	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling socket DYROS series 30 with hose end without valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.