Is the 90Â° JIC INTERLOCK GW UNF end, carbon steel compatible with hoses 4SH, R13, and R15 and does its internal UNF thread with 74Â° cone and O-ring ensure a leak-free seal?

Yes. The 90Â° JIC INTERLOCK GW UNF end, carbon steel is designed for compatibility with hose types 4SH, R13, and R15. Its internal UNF thread mated to a 74Â° cone with O-ring provides a reliable sealing system: the 74Â° cone establishes metal-to-metal alignment while the O-ring delivers elastic sealing to prevent fluid leakage and absorb minor surface imperfections. Made of carbon steel with galvanization, the fitting offers strength and corrosion resistance suitable for high-pressure hydraulic applications when used within specified pressure and temperature limits and with correct assembly (proper torque, compatible O-ring material, and clean mating surfaces). Ensure hose and fitting sizes match and follow manufacturer installation guidelines for a leak-free connection.

Does the 90Â° JIC INTERLOCK GW UNF end, carbon steel work with hose types 4SH, R13, and R15 while using its internal UNF thread, 74Â° cone, and Oâring for sealing?

Yes. The 90Â° JIC INTERLOCK GW UNF end, carbon steel is designed for hose types 4SH, R13, and R15 and uses its internal UNF thread, 74Â° cone, and Oâring for sealing. The carbon steel, galvanized construction matches the described fitting and sealing features for those hose types.

Can the 90Â° JIC INTERLOCK GW UNF end, carbon steel be used with 4SH, R13, and R15 hoses without special adapters?

Yes. The 90Â° JIC INTERLOCK GW UNF end, carbon steel is designed specifically for use with 4SH, R13, and R15 hoses. It features an internal UNF thread and a 74Â° cone with an Oâring, which is the standard sealing interface for JIC fittings used on these hose types. Because the part is described as a 90Â° JIC INTERLOCK fitting for hose type 4SH, R13, and R15, no special adapters are requiredâthe fitting will mate directly with those hoses when properly assembled and crimped to the matching interlock ferrule/cover. Ensure hose and fitting sizes (dash size) match, the Oâring and cone are intact, and installation follows recommended crimping and torque procedures for a reliable, leakâfree connection.

90° JIC INTERLOCK GW UNF end, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

90° JIC INTERLOCK fitting with internal UNF thread, 74° cone with o-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ILJW210-17-12	End. JIC 90° INTERLOCK G1 1/16", hose 3/4"	20	-	In stock	Enquiry
TI-ILJW210-21-16	End. JIC 90° INTERLOCK G1.5/16", hose 1"	25	-	In stock	Enquiry
TI-ILJW210-26-20	End. JIC 90° INTERLOCK G1.5/8", hose 1.1/4"	32	-	In stock	Enquiry
TI-ILJW210-30-24	End. JIC 90° INTERLOCK G1.7/8", hose 1.1/2"	38	-	In stock	Enquiry
TI-ILJW210-40-32	End. JIC 90° INTERLOCK G 2.1/2", hose 2"	50	-	In stock	Enquiry