Can Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel be crimped using standard hydraulic crimping sleeves for hoses?

Yes . Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel can be crimped using standard hydraulic crimping sleeves intended for the hose type. The fitting is a standard hydraulic end (type Z) with a regular hydraulic tail for hose connection and is specifically described as "Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose." Ensure you use a crimping sleeve sized and profiled for the specific hose construction (e.g., single-wire, multi-wire, textile) and follow the hose and sleeve manufacturerâs crimping specifications (die set, pressure, indent dimensions). Verify material compatibility (galvanized carbon steel fitting vs. hose reinforcement) and perform pressure/leak tests after crimping to confirm a reliable seal with the cutting ring (BES) and proper assembly.

Is Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel compatible with crimping using industrial hose crimping sleeves?

Yes. Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel is designed for crimping in hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type. It features a regular hydraulic tail (type Z) with BES cutting-ring sealing and is specified for crimping applications; material: carbon steel, galvanized. Ensure you use the correct sleeve profile and crimping parameters for the specific hose to guarantee proper seal and safety.

Does Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel require specific crimping sleeve dimensions?

Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel requires a crimping sleeve matched to the hose type rather than a unique, fixed sleeve dimension inherent to the fitting itself. The product is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the specific hose construction (inner tube, reinforcement layers, cover) and nominal hose size. Key points: - The fitting uses a cutting ring (BES) for sealing and a regular hydraulic tail (type Z) that fits into the hose; the sleeveâs role is to crimp the hose assembly onto that tail. - Sleeve dimensions (length, inner diameter before crimp, wall thickness, and profile) depend on the hose manufacturer and series, and must match the hoseâs outer diameter and reinforcement type. - Use the crimp sleeve recommended by the hose manufacturer or the hose/fitting supplier; they provide the correct sleeve part number and crimping dimensions (closed diameter, indent pattern) for reliable seal and mechanical strength. - Confirm material compatibility (typically carbon steel sleeves for carbon steel fittings) and ensure the crimping tool is set to the specified crimping parameters for the selected sleeve/hose combination. In short: Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel does not mandate a unique sleeve size itself. you must use the crimping sleeve specified for the hose being assembled.

Fitting tube metric BES 90°, type ZMR212, series heavy, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	20

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with tube metric, cutting-ring sealing (BES), angled 90° series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions	Catalogue
TI-ZMR212-08-04	Fitting 90° tube 8 mm, hose 1/4", heavy	6	-	In stock	Enquiry
TI-ZMR212-10-04	Fitting 90° tube 10 mm, hose 1/4", heavy	6	-	In stock	Enquiry
TI-ZMR212-12-04	Fitting 90° tube 12 mm, hose 1/4", heavy	6	-	In stock	Enquiry
TI-ZMR212-12-05	Fitting 90° tube 12 mm, hose 5/16", heavy	8	-	In stock	Enquiry
TI-ZMR212-14-06	Fitting 90° tube 14 mm, hose 3/8", heavy	10	-	In stock	Enquiry
TI-ZMR212-14-08	Fitting 90° tube 14 mm, hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZMR212-16-08	Fitting 90° tube 16 mm, hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZMR212-20-08	Fitting 90° tube 20 mm, hose 1/2", heavy	12	-	In stock	Enquiry
TI-ZMR212-20-10	Fitting 90° tube 20 mm, hose 5/8", heavy	16	-	In stock	Enquiry
TI-ZMR212-20-12	Fitting 90° tube 20 mm, hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZMR212-25-12	Fitting 90° tube 25 mm, hose 3/4", heavy	20	-	In stock	Enquiry
TI-ZMR212-25-16	Fitting 90° tube 25 mm, hose 1", heavy	25	-	In stock	Enquiry
TI-ZMR212-30-16	Fitting 90° tube 30 mm, hose 1", heavy	25	-	In stock	Enquiry
TI-ZMR212-38-20	Fitting 90° tube 38 mm, hose 1.1/4", heavy	32	-	In stock	Enquiry
TI-ZMR212-38-24	Fitting 90° tube 38 mm, hose 1.1/2", heavy	38	-	In stock	Enquiry	-

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with tube metric, cutting-ring sealing (BES), angled 90° series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.