Is the CAMLOCK DP socket plug, brass end cap compatible with MIL-C-27487 (A-A-59326) DP couplings and safe for use up to 10 bar?

Yes. The CAMLOCK DP socket plug, brass end cap is made according to the American military standard MILâCâ27487 (AâAâ59326), so it is compatible with MILâCâ27487 (AâAâ59326) DP couplings. Its construction in brass and the manufacturerâs specification state a working pressure up to 10 bar (actual allowable pressure depends on the specific coupling size), so when paired with the appropriate DP coupling of the matching size it is safe for use up to 10 bar. Ensure you match the correct DP size and verify the couplingâs pressure rating and material compatibility for your application before use.

Can CAMLOCK DP socket plug, brass be used with MIL-C-27487 (A-A-59326) DP couplings of different sizes and pressure ratings?

No. CAMLOCK DP socket plug, brass made to MIL-C-27487 (A-A-59326) dimensions is intended to match the same DP coupling specification. You should not mix sizes or pressure-rated variants: couplings of different nominal sizes or different pressure ratings may have incompatible dimensions, sealing faces or mechanical strength, risking leaks or failure. Use CAMLOCK DP socket plug, brass only with MIL-C-27487 (A-A-59326) DP couplings of the same size and equal-or-higher pressure rating specified for the plug. If in doubt, verify manufacturer compatibility data or test under intended service conditions.

Does the CAMLOCK DP socket plug, brass meet MIL-C-27487 (A-A-59326) specifications for temperature and chemical resistance?

Probably not conclusively. the product description alone is insufficient to confirm full compliance of the CAMLOCK DP socket plug, brass with all MILâCâ27487 (AâAâ59326) temperature and chemical resistance requirements. Why: The description states the end cap is "made according to American military standard MILâCâ27487 (AâAâ59326)", is brass, and lists working pressure. That indicates the design and basic materials aim to meet the standard. However, MILâCâ27487/AâAâ59326 specifies detailed requirements (including specific alloy composition, heat treatment, dimensional tolerances, temperature ranges, and resistance to specified chemicals/environmental exposures). Compliance typically requires documented material certification, test reports or inspection records demonstrating the part meets the standardâs temperature limits and chemical resistance tests. What you need to confirm compliance: - Manufacturerâs certificate of conformity referencing MILâCâ27487 (AâAâ59326). - Material certification showing brass alloy and treatment match the specification. - Test reports for temperature performance and chemical exposure per the standard. - Traceability and inspection records or qualified supplier documentation. Conclusion: If the manufacturer can provide the above documentation, then CAMLOCK DP socket plug, brass can be considered to meet the MILâCâ27487 (AâAâ59326) temperature and chemical resistance requirements. Without those documents, the product description alone does not prove full compliance.

CAMLOCK DP socket plug, brass

Additional information

Material	B – brass (bronze)

End cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on coupling size. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-DP-050-B	CAMLOCK connector DP 1/2" brass	-	9	In stock	Enquiry
AC-DP-050-BX	CAMLOCK connector DP 1/2" brass	-	9	In stock	Enquiry
AC-DP-075-B	CAMLOCK connector DP 3/4" brass	-	10	In stock	Enquiry
AC-DP-075-BX	CAMLOCK DP 3/4" connector, brass	-	10	In stock	Enquiry
AC-DP-100-B	CAMLOCK connector DP 1" brass	-	10	In stock	Enquiry
AC-DP-100-BX	CAMLOCK connector DP 1" brass	-	10	In stock	Enquiry
AC-DP-125-B	CAMLOCK connector DP 1.1/4" brass	-	10	In stock	Enquiry
AC-DP-125-BX	CAMLOCK connector DP 1.1/4", brass	-	10	In stock	Enquiry
AC-DP-150-B	CAMLOCK connector DP 1.1/2" brass	-	10	In stock	Enquiry
AC-DP-150-BX	CAMLOCK connector DP 1.1/2", brass	-	10	In stock	Enquiry
AC-DP-200-B	CAMLOCK DP 2" brass connector	-	10	In stock	Enquiry
AC-DP-200-BX	CAMLOCK DP 2" connector, brass	-	10	In stock	Enquiry
AC-DP-250-B	CAMLOCK connector DP 2.1/2" brass	-	10	In stock	Enquiry
AC-DP-250-BX	CAMLOCK connector DP 2.1/2", brass	-	10	In stock	Enquiry
AC-DP-300-B	CAMLOCK DP 3" brass connector	-	10	In stock	Enquiry
AC-DP-300-BX	CAMLOCK DP 3" connector, brass	-	10	In stock	Enquiry
AC-DP-400-B	CAMLOCK DP 4" brass connector	-	10	In stock	Enquiry
AC-DP-400-BX	CAMLOCK DP 4" connector, brass	-	10	In stock	Enquiry
AC-DP-500-B	CAMLOCK connector DP 5" brass	-	5	In stock	Enquiry
AC-DP-500-BX	CAMLOCK DP 5" connector, brass	-	5	In stock	Enquiry
AC-DP-600-B	CAMLOCK connector DP 6" brass	-	5	In stock	Enquiry
AC-DP-600-BX	CAMLOCK connector DP 6", brass	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on coupling size. Material: brass.