Is the Walterscheidâ¢ SV straight bulkhead fitting, carbon steel, with 24Â° DIN 2353 sockets and counter nut available in both L (light) and S (heavy) series?

Yes. The Walterscheidâ¢ SV straight bulkhead fitting, carbon steel with 24Â° DIN 2353 sockets and counter nut is available in both L (light) and S (heavy) series.

Does the Walterscheidâ¢ SV straight bulkhead fitting, carbon steel, with Guardian Sealâ¢ coating accept standard 24Â° DIN 2353 hoses on both sides?

Yes. The Walterscheidâ¢ SV straight bulkhead fitting, carbon steel accepts standard 24Â° DIN 2353 fittings on both sides: it features a 24Â° DIN 2353 socket on each end with external metric thread, compatible with standard 24Â° DIN 2353 hoses/ferrules. It is available in L (light) and S (heavy) series and is carbon steel with Guardian Sealâ¢ galvanic coating.

Can the Walterscheidâ¢ SV straight bulkhead fitting, carbon steel, with 24Â° DIN 2353 sockets be used in high-pressure hydraulic systems?

Yes. the Walterscheidâ¢ SV straight bulkhead fitting, carbon steel, with 24Â° DIN 2353 sockets can be used in highâpressure hydraulic systems, provided the specific series (L light or S heavy) and the mating components are selected and installed in accordance with DIN 2353 and the systemâs pressure/temperature ratings. Key points: - The 24Â° DIN 2353 connection is a widely accepted metal-to-metal sealing standard for high-pressure hydraulics; when properly assembled with the matching 24Â° cone sockets and counter nuts, it provides a reliable pressure-tight joint. - Material: carbon steel construction with Guardian Sealâ¢ galvanic coating offers adequate strength and corrosion protection for typical hydraulic applications. For extremely corrosive environments or special fluids, stainless steel or additional protection may be required. - Series selection: the S (heavy) series will have higher pressure and mechanical load capacity than the L (light) series. Choose the series whose rated working pressure and safety factors meet or exceed your systemâs maximum operating and peak pressures. - Compatibility and installation: ensure correct thread sizes, compatible mating parts, intact sealing surfaces, correct torque on counter nuts, and adherence to DIN 2353 assembly procedures. Use proper fittings, tube/hose, and testing per system specifications. - Verification: always confirm the exact pressure ratings and temperature limits from Walterscheid/Eaton product documentation or datasheet for the chosen series and size, and ensure compliance with relevant standards and safety factors for your application. Conclusion: Suitable for high-pressure hydraulic use when the correct series, size, compatible components and DIN 2353 assembly practices are followed and the productâs rated limits match the system requirements.

Fitting straight bulkhead Walterscheid™ SV, carbon steel

Additional information

Material	CS – steel (cast iron)

Fitting DIN 2353 Eaton Walterscheid™ straight bulkhead, type SV with a locknut: 24° DIN 2353 socket on both sides with metric male thread. Available as: L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-SV-06L-W	Fitting Walterscheid DIN 2353 SV 6L	-	500	In stock	Enquiry
HD-SV-06S-W	Fitting Walterscheid DIN 2353 SV 6S	-	800	In stock	Enquiry
HD-SV-08L-W	Fitting Walterscheid DIN 2353 SV 8L	-	500	In stock	Enquiry
HD-SV-08S-W	Fitting Walterscheid DIN 2353 SV 8S	-	800	In stock	Enquiry
HD-SV-10L-W	Fitting Walterscheid DIN 2353 SV 10L	-	500	In stock	Enquiry
HD-SV-10S-W	Fitting Walterscheid DIN 2353 SV 10S	-	800	In stock	Enquiry
HD-SV-12L-W	Fitting Walterscheid DIN 2353 SV 12L	-	400	In stock	Enquiry
HD-SV-12S-W	Fitting Walterscheid DIN 2353 SV 12S	-	630	In stock	Enquiry
HD-SV-15L-W	Fitting Walterscheid DIN 2353 SV 15L	-	400	In stock	Enquiry
HD-SV-16S-W	Fitting Walterscheid DIN 2353 SV 16S	-	630	In stock	Enquiry
HD-SV-18L-W	Fitting Walterscheid DIN 2353 SV 18L	-	400	In stock	Enquiry
HD-SV-20S-W	Fitting Walterscheid DIN 2353 SV 20S	-	420	In stock	Enquiry
HD-SV-22L-W	Fitting Walterscheid DIN 2353 SV 22L	-	250	In stock	Enquiry
HD-SV-25S-W	Fitting Walterscheid DIN 2353 SV 25S	-	420	In stock	Enquiry
HD-SV-28L-W	Fitting Walterscheid DIN 2353 SV 28L	-	250	In stock	Enquiry
HD-SV-30S-W	Fitting Walterscheid DIN 2353 SV 30S	-	400	In stock	Enquiry
HD-SV-35L-W	Fitting Walterscheid DIN 2353 SV 35L	-	250	In stock	Enquiry
HD-SV-38S-W	Fitting Walterscheid DIN 2353 SV 38S	-	400	In stock	Enquiry
HD-SV-42L-W	Fitting Walterscheid DIN 2353 SV 42L	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting DIN 2353 Eaton Walterscheid™ straight bulkhead, type SV with a locknut: 24° DIN 2353 socket on both sides with metric male thread. Available as: L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.