Can SPEEDFIT male threaded coupling, plastic handle 10 bar at +23Â°C and 7 bar at +70Â°C in compressed air installations?

Yes. The SPEEDFIT male threaded coupling, plastic is rated for use in compressed air installations. Its specified working pressure is 10 bar at +23Â°C and 7 bar at +70Â°C, and it is intended for use with plastic or metal pipes (copper, brass, aluminum) in compressed air systems. Ensure the system temperature and pressure do not exceed these limits and follow proper installation practices for safety and leak-free performance.

Is SPEEDFIT male threaded coupling, plastic suitable for use with copper or aluminum pipes in compressed air systems?

Yes. The SPEEDFIT male threaded coupling, plastic is suitable for use with copper or aluminum pipes in compressed air systems. The product description states it is an external threaded fitting for the SPEEDFIT system that can be installed with plastic or metal pipes (copper, brass, aluminum). Its working pressure ratings are 10 bar at +23Â°C and 7 bar at +70Â°C, and its operating temperature range is â20Â°C to +70Â°C. Ensure connections, thread compatibility, and system pressure/temperature remain within these limits and follow applicable installation and safety standards.

Can SPEEDFIT male threaded coupling, plastic withstand temperature cycling between -20Â°C and +70Â°C in compressed air systems?

Yes. The SPEEDFIT male threaded coupling, plastic is specified for operation across a temperature range from -20Â°C to +70Â°C, so it is designed to withstand temperature cycling within these limits in compressed air systems. Performance considerations: - Temperature rating: The productâs operating temperature is explicitly listed as -20Â°C to +70Â°C, confirming material suitability for repeated cycles within that span. - Pressure derating: Working pressure is 10 bar at +23Â°C and reduces to 7 bar at +70Â°C. At higher temperatures near +70Â°C expect lower maximum allowable pressureâdesign the system accordingly. - Material and application: The fitting is plastic and intended for compressed air installations with plastic or metal piping (copper, brass, aluminum). Ensure compatibility with the chosen pipe material and system conditions. - Practical advice: Minimize extreme thermal shocks and rapid, frequent cycling if possible. Regularly inspect seals and joints for wear, especially if operating near the upper temperature or pressure limits. Conclusion: Yesâthe SPEEDFIT male threaded coupling, plastic can withstand temperature cycling between -20Â°C and +70Â°C when used within the specified pressure limits and with appropriate system design and inspection.

Coupling with a thread external SPEEDFIT, plastic plastic

All products, Pneumatic piping systems/

Additional information

Material	P – material (plastic)

Coupling with a thread external for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JG-PM010611E	Fitting screw-in 6 mm x 1/8" BSP	-	10	In stock	Enquiry
JG-PM010813E	Fitting screw-in 8 mm x 3/8" BSP	-	10	In stock	Enquiry
JG-PM011014E	Fitting screw-in 10 mm x 1/2" BSP	-	10	In stock	Enquiry
JG-PM011213E	Fitting screw-in 12 mm x 3/8" BSP	-	10	In stock	Enquiry
JG-PM011214E	Fitting screw-in 12 mm x 1/2" BSP	-	10	In stock	Enquiry
JG-PM011514E	Fitting screw-in 15 mm x 1/2" BSP	-	10	In stock	Enquiry
JG-PM011516E	Fitting screw-in 15 mm x 3/4" BSP	-	10	In stock	Enquiry
JG-PM011814E	Fitting screw-in 18 mm x 1/2" BSP	-	10	In stock	Enquiry
JG-PM012216E	Fitting screw-in 22 mm x 3/4" BSP	-	10	In stock	Enquiry
JG-PM012818E	Fitting screw-in 28 mm x 1" BSP	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Coupling with a thread external for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.