Can the Pneumatic timing elementâs maximum delay be increased by connecting an external tank, and are there any restrictions on tank size or connection type?

Yes . the Pneumatic timing elementâs maximum delay can be increased by connecting an additional external tank. The product description explicitly states the maximum delay value can be increased this way. Restrictions and practical considerations: - No specific limit on external tank size or explicit connection-type restrictions are given in the description. - Use compatible 4 mm tubing (the unit has plug connections for 4 mm tubing). - Ensure tank and connections are suitable for the deviceâs working conditions: operating pressure 2.5â8 bar and operating temperature â10Â°C to +60Â°C. - Materials and seals (anodized aluminum/plastic body, brass/plastic internals, NBR sealing) imply standard pneumatic compatibility; avoid materials or fluids that could damage seals. - Larger tanks will affect dynamic behavior (delay and reset characteristics) and may impact repeatability (+/â0.4 s) and signal reset time (<0.1 s). - Follow safe pressure practices and relevant standards when sizing and installing tanks.

How does the Pneumatic timing element maintain accuracy when the delay is adjusted near its maximum 30 s range?

The Pneumatic timing element maintains accuracy near the maximum 30 s delay through a combination of stable mechanical design, controlled supply conditions, and optional volume increase. Key factors: - Built-in pressure indicator and operation within the specified working pressure (2.5â8 bar, nominally 6 bar) keep supply pressure stable, minimizing timing drift. - Precision internal components (brass/plastic) and NBR sealing ensure consistent airflow metering and low leak rates. - The control knob provides fine adjustment; repeatability specified as Â±0.4 s ensures consistent results even near the limit. - If needed, connecting an external tank increases total volume, allowing the element to achieve longer delays without stressing the internal metering, improving stability at the upper range. - Fast signal reset (<0.1 s) and mounting flexibility help prevent position-related variability.

Does the Pneumatic timing element require specific maintenance to ensure the control knob's delay setting stays accurate over time?

Pneumatic timing element does not require complex maintenance to keep the control knobâs delay setting accurate, but some basic periodic checks and care are recommended to ensure long-term stability: - Keep connections and tubing clean and leak-free: inspect 4 mm tube plugs and fittings for leaks and tightness; air leaks can change effective pressure and affect timing. - Maintain operating pressure within specified range (2.5â8 bar) and preferably stable around the nominal condition (6 bar); pressure fluctuations shift delay and repeatability. - Check and, if needed, top up or replace external tank if used to extend maximum delay; tank integrity affects available volume and timing range. - Inspect and clean the control knob area to prevent dirt ingress that could impede setting accuracy. - Verify seals (NBR) periodically for signs of wear, hardening or damage; replace if deteriorated to avoid leaks and timing drift. - Monitor repeatability and perform functional checks (set delay and verify output). the device specification lists repeatability Â±0.4 s and signal reset time <0.1 s. - Avoid exposure outside rated temperature range (â10Â°C to +60Â°C); extreme temperatures can change material dimensions and seal properties, affecting accuracy. - Protect the unit from mechanical shocks and corrosive environments; anodized aluminum/plastic and brass/plastic internals are durable but not maintenance-free. Following these simple inspections and environmental controls will help the Pneumatic timing element maintain accurate delay settings over time.

Pneumatic timing element

Q: How does the Pneumatic timing element maintain accuracy when the delay is adjusted near its maximum 30 s range?

The Pneumatic timing element maintains accuracy near the maximum 30 s delay through a combination of stable mechanical design, controlled supply conditions, and optional volume increase. Key factors: - Built-in pressure indicator and operation within the specified working pressure (2.5â8 bar, nominally 6 bar) keep supply pressure stable, minimizing timing drift. - Precision internal components (brass/plastic) and NBR sealing ensure consistent airflow metering and low leak rates. - The control knob provides fine adjustment; repeatability specified as Â±0.4 s ensures consistent results even near the limit. - If needed, connecting an external tank increases total volume, allowing the element to achieve longer delays without stressing the internal metering, improving stability at the upper range. - Fast signal reset (<0.1 s) and mounting flexibility help prevent position-related variability.

Q: Does the Pneumatic timing element require specific maintenance to ensure the control knob's delay setting stays accurate over time?

Pneumatic timing element does not require complex maintenance to keep the control knobâs delay setting accurate, but some basic periodic checks and care are recommended to ensure long-term stability: - Keep connections and tubing clean and leak-free: inspect 4 mm tube plugs and fittings for leaks and tightness; air leaks can change effective pressure and affect timing. - Maintain operating pressure within specified range (2.5â8 bar) and preferably stable around the nominal condition (6 bar); pressure fluctuations shift delay and repeatability. - Check and, if needed, top up or replace external tank if used to extend maximum delay; tank integrity affects available volume and timing range. - Inspect and clean the control knob area to prevent dirt ingress that could impede setting accuracy. - Verify seals (NBR) periodically for signs of wear, hardening or damage; replace if deteriorated to avoid leaks and timing drift. - Monitor repeatability and perform functional checks (set delay and verify output). the device specification lists repeatability Â±0.4 s and signal reset time <0.1 s. - Avoid exposure outside rated temperature range (â10Â°C to +60Â°C); extreme temperatures can change material dimensions and seal properties, affecting accuracy. - Protect the unit from mechanical shocks and corrosive environments; anodized aluminum/plastic and brass/plastic internals are durable but not maintenance-free. Following these simple inspections and environmental controls will help the Pneumatic timing element maintain accurate delay settings over time.

Accessories for pneumatic fittings, All products/

Additional information

Material	P – material (plastic)

Timing element whose function is to introduce a delay for a pneumatic signal. The output signal delay is set with an adjustment knob. The maximum delay can be increased by connecting an additional external tank. Built-in pressure indicator and push-in fittings for 4 mm tubing. Can be mounted in any position. Material: body – anodized aluminum/plastic, internal parts: brass/plastic, sealing – NBR. Operating temperature: from -10°C to +60°C. Working pressure: 2.5 to 8 bar. Nominal flow: 100 Nl/min at 6 bar with a 1 bar pressure drop. Adjustable delay range: 0 to 30 s at 6 bar. Signal reset time: <0.1 s. Repeatability: +/-0.4 s.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-W3604000006	Timing element TIMER (delay valve)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Timing element whose function is to introduce a delay for a pneumatic signal. The output signal delay is set with an adjustment knob. The maximum delay can be increased by connecting an additional external tank. Built-in pressure indicator and push-in fittings for 4 mm tubing. Can be mounted in any position. Material: body – anodized aluminum/plastic, internal parts: brass/plastic, sealing – NBR. Operating temperature: from -10°C to +60°C. Working pressure: 2.5 to 8 bar. Nominal flow: 100 Nl/min at 6 bar with a 1 bar pressure drop. Adjustable delay range: 0 to 30 s at 6 bar. Signal reset time: <0.1 s. Repeatability: +/-0.4 s.